On Location at HKPCA: IPC’s Mitchell and Carmichael on Asia, the Global Industry Outlook, and Trump
January 4, 2017 | Barry Matties, I-Connect007Estimated reading time: 16 minutes
While in Shenzhen, China recently, with the PCB industry’s biggest trade show as a backdrop, Publisher Barry Matties sat down once again to interview IPC President John Mitchell and IPC Asia President Phil Carmichael. This time they discussed trends they’re seeing in the Asia-Pacific region and what a Trump presidency means to the industry.
Barry Matties: With the International Printed Circuit and APEX South China fair as our setting, please give our readers a little context about this show, its purposes, and its successes.
John Mitchell: To begin with the scope, there's approximately 500 exhibitors and about 2500 booths.
Phil Carmichael: Overall, it looks like it will be 4–5% bigger than last year, so it will maintain its position as the largest show in our industry, worldwide.
Matties: Oh really? Worldwide?
Mitchell: That's what they say, around 50,000 square meters.
Matties: I guess I'm comparing that to electronica or productronica, but that's a diverse show.
Carmichael: That's a diverse show. In our space, we compare it to the IPC APEX EXPO, and it's much bigger. So if you're talking about the printed circuit board industry, the supply chain people, equipment manufacturers, the chemical folks and so forth, it's the biggest in that space.
Matties: Phil, why don't you begin by telling us what’s going on here with the Chinese market.
Carmichael: We're continuing to see growth. We'll have another record year this year. We will end the year in the Asia Pacific with over 900 members, a net increase of over 100 members for the year. We're continuing to see growth opportunities. China is starting to suffer some of the same pressures that other companies have as far as the cost of producing things.
So we're seeing a number of manufacturers looking at alternative spots to manufacture, like Vietnam and Thailand. I think that trend will continue. The wage delta for operators is a factor of five to six between Vietnam and China, so that starts to allow you to consider moving somewhere else. If it was a few percent or 25%, you probably wouldn't move, but when it's a factor of five then it starts to be compelling.
Matties: So the economy in China has been what most people would call flat, 6 or 7%. Is there a recovery so to speak in place now, do you think?
Carmichael: You know, our industry has always done a little bit better than the general economy. I'd say that's still the case. It's been a pretty healthy year. I've talked to a number of exhibitors today, both Chinese domestic and a couple of foreign exhibitors. They're pretty pleased with this year from an economic standpoint. Is it a robust recovery? No, but it's a solid year of business so I think that's why we kind of characterize it that way.
Matties: This market, it seems like 10 or 15 years ago, it was more of the Wild West. It's a maturing market and the dynamics seem to be different in a maturing market. How would you describe the comparisons of then and now?
Carmichael: You're right, China is much more of an integrated player within the worldwide supply chain than it was 10 years ago. So things that happen on a worldwide basis have an effect on China and vice versa. And you've got this really extended supply chain. You've got people making materials in one place, equipment somewhere else, doing final assembly maybe here in Shenzhen to ship into a product to be final assembled in Chongqing and shipped out as an iPad. That's the type of supply chain; it's gotten very sophisticated and quite complicated. But I'd say certainly China and the rest of Asia, Taiwan, Japan and Korea, are now all fully integrated into this worldwide supply chain now.
Matties: How's the attitude in China towards the election and the new direction in America? In particular, when there's conversation of Apple pulling some of the manufacturing out of Foxconn, or is it just that Foxconn will set up a facility in America?
Carmichael: Maybe I should defer the U.S. election question to John.
Mitchell: If Foxconn were to create a factory in the U.S. in response to President-elect Trump’s promises to put a 45% tariff on China goods, that would likely not result in as many jobs in the U.S. as one might think. Much of that factory would likely be automated, and whatever new jobs were created would likely be focused on highly skilled advanced manufacturing. Of course, that is all conjecture at this point as no one really knows for sure what will happen under the Trump administration.
Things will be different, but that can be a good thing. I tend to take more of a positive outlook on things. If President-elect Trump, once he becomes President Trump, actually does things that are very strongly aligned with business, he'll be able to move them through quickly because he's got a full Republican Congress now. That is a positive thing.
And that seems to be his tendency. So I think we'll see things like tax reform, which has been years in battle and unable to move, begin to. I think we'll see some things happen there. One of the challenges globally that the U.S. faces is its tax structure. It’s the second worst in the entire world for corporations in terms of trying to do business in the U.S. During our IMPACT Washington, D.C. event, we bring in many of our members who are U.S.-based, who also have facilities over here in Asia. They tell the Administration and they tell their Congressmen all the same thing: “Look, I'd love to build a factory here, but you're going to hit me with a 20% penalty just for starting here? How do I explain that to my Board?” You can't. If they fix that situation, it could be interesting.
On the other hand, this idea of building a wall and throwing up tariffs and harming the import-export peace is going to counteract that. Let's say they address the tax issue, and they build a factory in the U.S.; if you can't buy goods from wherever you need to buy them, the prices still go up. And if you only have a market to sell to that's limited to local, there's nowhere to sell the goods. So that's not going to help manufacturing. It has to be a total solution. But Trump has been, and maybe you've heard this once or twice, inconsistent in what he's said versus what he does. The hope is that he will be very business friendly and that he will help the U.S. economy. That will help the global economy. If the U.S. can start growing jobs to make even stronger purchases, then the entire global economy, if trade is maintained there, will pick up. That will help Asia, that will help Europe, that will help everywhere.
Page 1 of 3
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.