Stretching Beyond Flex
March 30, 2017 | Andy Behr, Panasonic Electronic MaterialsEstimated reading time: 1 minute
Emerging end-use electronic applications are driving dramatic innovations in circuit board and interconnection technology. New form factors, functionality and durability requirements are challenging the status quo for the PCB industry and pushing design, material and process development to the limit. Incipient devices like wearables, epidermal monitors, embedded sensors, smart labels, human machine interfaces (HMIs), conformable antennas, flexible displays and in-mold electronics (IME) require a combination of circuit stretchability and toughness that isn’t achievable with conventional circuit manufacturing technologies.
Device manufacturers are seeking alternative methods for creating wiring patterns and interconnecting components that are more conformable, elastic and durable than currently available. To set the stage for a discussion on stretchable circuit technology, this article describes two classes of polymers commonly used for manufacturing circuit boards and outlines the developmental arc of two fundamental PCB materials, conductive circuits and organic substrates. The article concludes by reviewing stateof-the art, commercially available stretchable substrate and conductor technologies, as well as new materials and processes that are being researched.
Thermoplastic and Thermosetting Polymers
Broadly speaking, the polymers used for manufacturing electronics may be divided into two classes: thermoplastic and thermoset. The division is based on the degree of chemical cross-linking between the constituent molecules and the temperature-related mechanical properties this cross-linking (or lack thereof) imparts. Depending on the resin system, both classes of polymers can exhibit a wide variety of properties. For example, both thermoplastic and thermoset resins can run the gamut of hardness physiognomies from rigid and brittle to flexible and bendable to elastomeric and stretchable.
Thermoplastic polymers typically have a low degree of intermolecular cross-linking. The long chain polymer molecules are tightly “tangled” at temperatures below the glass transition (Tg), resulting in a solid or “glassy” material.
To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.
Suggested Items
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.
Real Time with... IPC APEX EXPO 2024: Final Finishes and IC Substrate Manufacturing
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont and Richard DePoto, Uyemura's Business Development Manager, engage in a comprehensive discussion about the positive aspects of the show, the benefits of RAIG in final finishes, and the hurdles faced when upgrading your surface finish. Also discussed are the role of Uyemura's MEC pretreatment agents in IC substrate manufacturing and the importance of collaboration and knowledge sharing.
Women MAKE Awards Recognizes GlobalFoundries’ Jennifer Robbins and Katelyn Harrison for Manufacturing Excellence
04/24/2024 | GlobalFoundriesThe Manufacturing Institute (MI)—the workforce development and education affiliate of the National Association of Manufacturers—honored two outstanding women from GlobalFoundries (GF) at their annual Women MAKE Awards. Jennifer (Jenny) Robbins, Senior Director, Central Facilities, was recognized as a 2024 Women MAKE Awards Honoree, while Katelyn Harrison, Senior Integration Engineer, was honored as an Emerging Leader.
GlobalFoundries Commits to Achieving Net Zero Emissions and Carbon-Neutral Power by 2050
04/23/2024 | GlobalFoundriesGlobalFoundries (GF) is furthering its commitment to sustainable operations and fighting climate change with the announcement of two new long-term goals to achieve net-zero greenhouse gas (GHG) emissions and 100% carbon-neutral power by 2050.
ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
04/23/2024 | ROHMROHM and STMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications, announced today the expansion of the existing multi-year, long-term 150mm silicon carbide (SiC) substrate wafers supply agreement with SiCrystal, a ROHM group company.