Brittle Pals Bond for Flexible Electronics
May 13, 2019 | Rice UniversityEstimated reading time: 3 minutes
Mixing two brittle materials to make something flexible defies common sense, but Rice University scientists have done just that to make a novel dielectric.
Image Caption: An electron microscope image of the flexible dielectric alloy created at Rice University shows a layered structure of sulfur and selenium and a lack of voids. The material shows promise as a separator for next-generation flexible electronics. (Credit: Ajayan Research Group/Rice University)
Dielectrics are the polarized insulators in batteries and other devices that separate positive and negative electrodes. Without them, there are no electronic devices.
The most common dielectrics contain brittle metal oxides and are less adaptable as devices shrink or get more flexible. So Rice scientists developed a dielectric poised to solve the problem for manufacturers who wish to create next-generation flexible electronics.
Until now, manufacturers had to choose between brittle dielectrics with a high constant (K) – the material’s ability to be polarized by an electric field – or flexible low-K versions.
The material created at Rice has both. Rice materials scientist Pulickel Ajayan and graduate student and lead author Sandhya Susarla combined sulfur and selenium to synthesize a dielectric that retains the best properties of high-K ceramics and polymers and low-K rubber and polyvinyl.
“We were surprised by this discovery because neither sulfur or selenium have any dielectric properties or have a ductile nature,” Susarla said. “When we combined them, we started playing with the material and found out that mechanically, it behaved as a compliant polymer.”
Susarla said the new material is cheap, scalable, lightweight and elastic, and has the electronic properties necessary to be a player in the emerging field of flexible technologies. Given that it’s so simple, why had nobody thought of it before?
“There are a few reports in early 1900s on the synthesis of these materials and their viscoelastic properties,” Susarla said. “But since no one was interested in flexible semiconductors back then, their dielectric properties were ignored.”
Their method of manufacture began with a bit of elbow grease, as the researchers mixed sulfur and selenide powders in a mortar and pestle. Melting them together at 572 degrees Fahrenheit in an inert argon atmosphere allowed them to form the dense semicrystalline alloy they saw in electron microscope images. Computational models helped them characterize the material’s molecular structure.
Then they squished it.
Compression tests in a lab press crushed pure sulfur and selenium crystals, but the new alloy recovered 96% of its previous form when the same load was lifted.
Susarla said the repulsion of dipole moments in the selenium matrix are most responsible for the material’s ability to recover. “There are some attractive forces in the sulfur and selenium rings that make the material stable, and there are repulsive forces that make the material incompressible,” she said.
Susarla said the material is stable, abundant and easy to fabricate, and should be simple to adapt for micro- and nanoscale electronics. “Since the viscosity of this material is high, forming thin films can be a little difficult,” she said. “That is the current challenge we are trying to deal with.”
Chandra Sekhar Tiwary, a former Rice research scientist and now an assistant professor at the Indian Institute of Technology, Kharagpur, is co-corresponding author of the paper. Co-authors are Rice alumni Thierry Tsafack and Peter Samora Owuor, research assistants Anand Puthirath and BenMaan Jawdat, research scientist Babu Ganguli, graduate students Amey Apte and David Tam, Pengcheng Dai, a professor of physics and astronomy, and Jun Lou, a professor of materials science and nanoengineering; Jordan Hachtel, Juan Carlos Idrobo and Andrew Lupini of Oak Ridge National Laboratory, Oak Ridge, Tennessee; Martin Hilario of the Air Force Research Laboratory, Albuquerque, New Mexico; Albert Lerma of Leidos, Inc., of Albuquerque; Hector Calderon of the University of Houston; Francisco Robles Hernandez of the National Polytechnic Institute of Mexico, and Tong Li and Bingqing Wei of the University of Delaware.
Ajayan is chair of Rice’s Department of Materials Science and NanoEngineering, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and a professor of chemistry.
The Department of Energy Office of Science, Basic Energy Sciences, supported the research.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.