Design Considerations: Flexible Circuit vs. Traditional PCB
May 7, 2015 | John Talbot, Tramonto CircuitsEstimated reading time: 1 minute
Recent global printed circuit market research reveals that flexible circuits still only account for about 13–15% of the overall printed circuit market (PCB 76.2B in 2015 vs. flex 12.7B in 2015). PCBs have been in existence since the 1960s and nearly anybody who designs printed circuits first designs a rigid printed circuit board. There are many experienced PCB designers working confidently all around the world.
They understand the manufacturing capabilities and limitations very well as they have been designing these inherent components of the electronics industry for decades.
Flexible circuits, on the other hand, tend to be a little intimidating and mysterious to traditional PCB designers. Suddenly engineers in the development group are coming to their designers with questions about flexible circuits and these otherwise very experienced men and women find themselves without answers to questions they could answer in their sleep if they pertained to a traditional PCB.
It’s understandable that there are still questions about flexible circuit design vs. traditional PCB design based on the number of PCBs vs. flexible circuits manufactured worldwide, annually. However those of us in the flexible circuit fabrication market are often asked even the simplest of questions: what kind of software do I need to design a flexible circuit?
What kind of files must I submit for quotation/fabrication of a flexible circuit? These are questions that arise from the lack of experience in flexible circuit design. Below we will address some of the common concerns we hear from PCB designers and help to clarify some of the unknowns and show that the vast experience gained as PCB designers carries over to the flexible circuit design as well.
To read the full article, click here.
Editor's Note: This article originally appeared in the April 2015 issue of The PCB Magazine.
Suggested Items
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.