A Look at the High-Reliability Interconnect Market
July 15, 2015 | Barry Matties, I-Connect007Estimated reading time: 4 minutes
I-Connect007 Publisher Barry Matties recently met with Mark Cormier of Miraco Inc. to discuss the latest trends and drivers in the high-reliability segment, and their customers' increasing demand for quality.
Barry Matties: Mark, let’s start with an overview of Miraco.
Mark Cormier: We design interconnects and source interconnects. Most of our business is created from the need for a custom interconnect. The vast majority of our opportunities (~85%) are in the medical and military fields that require Class 3 high-reliability solutions. Our commercial business is only 15% of our total business.
The military designs we do are mostly avionics. We've had history in the past with doing a lot of ordinance, but right now that's not our big driver. Our ITAR registration has helped improve our visibility to more military designs.
Our medical designs are predominately medical device types of products. We seem to do very well in that area. It is long lead time, long design cycle.
Matties: What sorts of needs do your customers currently have?
Cormier: Typically they need an interconnect and they are short of time, short of manpower, or short of material knowledge. Miraco’s advantage is we're unbiased in the approach. We don't care if the design requires a flexible printed circuit, a flat flex cable or a wire harness. We can design and source any of the three options and have the capability of building the complete solution at either our North American facilities located in Manchester, New Hampshire or in Tijuana, Mexico. When volumes dictate, and with customer approval, we also have the option of building a full turnkey solution at our off-shore partner’s facilities. In summary, our customers benefit from our local design capability, our global sourcing network, and our multiple assembly options while keeping the quality assurance group in Manchester, New Hampshire.
Matties: When we look at medical electronics, that's a fast-moving market with a lot of changes being made.
Cormier: Yes, it is fast moving, and it slows down because the design cycles are so long from when you do prototyping to actually getting it into production. We just delivered a prototype that got a first-time order for something that we've been working on for eight years. We understand the material traceability requirements that our medical customers operate under.
Matties: When you say design, are you talking about from concept?Page 1 of 2
Suggested Items
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/12/2024 | Nolan Johnson, I-Connect007As we publish this week’s most-read news, the I-Connect007 team is wending its way home from an eventful and productive week at IPC APEX EXPO in Anaheim, California. We’ve posted a variety of dispatches from the show this week, released 73 realtimewith.com video interviews (and counting), and also gathered the content and updates you’ll be looking for in the upcoming issue of Show & Tell… IPC APEX EXPO 2024.
Material Insight: The Importance of Standards for the Chip Packaging Industry
04/12/2024 | Dr. Preeya Kuray -- Column: Material InsightI had the great pleasure of recently attending the National Institute of Standards and Technology’s (NIST) CHIPS R&D Chiplets Interfaces Technical Standards Workshop. The purpose was to bring together technical experts across industry and academia to deliberate one of the most pressing technological matters of 2024: chip packaging standards.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.