-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Good In, Good Out: Bay Area Circuits Discusses Data Strategies
December 2, 2015 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
A lot of companies talk about the importance of good data management, but for some firms, this amounts to little more than lip service. Then there are companies like fabricator Bay Area Circuits. I recently sat down with Bay Area Circuits President Stephen Garcia and COO Brian Paper to discuss how automating and upgrading their data systems has significantly cut down overall process time, as well as their drive to educate young PCB designers and actively promote the industry to the emerging electronics industry workforce.
Barry Matties: Let’s talk about how you manage your data. Are you a completely electronic company?
Stephen Garcia: We have tried to go as paperless as possible, and we're talking actual production data starting from the Gerber. We use Ucamco's Integr8tor software, which is the entire company's backbone. That is our database. Everything is automated. And then we've tied in our own software to connect supplement Integr8tor.
Matties: When you say your own software, is that something you developed?
Garcia: Yes, it's basically a customized CRM platform. Some production data, like process cards, are still printed, but eventually everything is digitized and stored on our servers for easy access which is especially important given that a good portion of our engineering staff works remotely and needs real-time access to data.
As we continue to grow and identify bottlenecks, we make sure employees have the access they need. Not long ago, QC may have been inspecting a job but may not have all the details. Maybe they just had a fab print and the process card, so would have to walk over to Planning and say “I'm seeing something out of the ordinary; was this approved by the customer?” Today they have full access. Each job gets a tool number, and then everything is saved on our server for employees to access the data required.
That's the hardest part of our job: incomplete or conflicting customer data. Every customer is different when it comes to Gerbers and their fab prints. We have a handful of customers who often provide us with Gerbers that rarely match the fab print. It might be a non-plated hole on their fab print, but then their Gerber is plated, things of that nature. Our system allows employees to have access to the data to investigate any issues and prevent production hiccups.
Brian Paper: We've put more emphasis on the netlist too, as far as ensuring that the customers are providing us with that type of information. We just posted a whole blog post on what a netlist is, and why it's important.
Garcia: With every customer being different, our biggest challenge is trying to educate them about what we need to successfully manufacture their project and why we need it. It’s amazing that even when some of our larger customers put on a generic fab print, half of it doesn't apply to the actual board, and we need to get approval. We say, “Hey, can we deviate away from your fab print?” and they say, “Yeah, that shouldn't be there. Just ignore it.” It definitely slows things down. We've really tried to automate as much as possible from the minute we get Gerbers.
To read this entire article, which appeared in the November 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methosd for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
KYZEN to Promote Pair of Stencil Cleaning Chemistries at SMTA Ciudad Jaurez Expo & Tech Forum
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Ciudad Juarez Expo & Tech Forum, scheduled to take place Thursday, May 9, 2024 at the Injectronic Convention Center in Ciudad Jaurez, Chihuahua, Mexico. During the event the KYZEN Clean Team will focus on understencil cleaning products KYZEN E5631J and CYBERSOLV C8882.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.