Lean Manufacturing and NPIP for Flexible Circuits


Reading time ( words)

Many companies are familiar with lean manufacturing concepts and have successfully used these techniques to improve manufacturing processes. Lean techniques, while most often used in printed circuit fabrication and assembly operations, can also be applied to nonmanufacturing processes. One such process is new part number introduction (NPIP). The main thrust of lean manufacturing is to eliminate or reduce waste. There are typically seven wastes (mudas), as defined by Toyota executive Taiicho Ohno, when he developed Toyota’s Production System (TPS)[1]. (“Muda” is a Japanese word meaning uselessness, idleness or other synonyms of waste.)  The seven mudas are:

  • Transport
  • Inventory
  • Motion
  • Waiting
  • Over-processing
  • Over-production
  • Defects

The typical part number startup for flexible circuits often can suffer from a number of those wastes. Certain waste items are specific to a part number (customer out of office, conflicts in documentation, iterative design conversations, etc.) or be ingrained as accepted gaps in a supplier’s product launch system. As part of a continuous improvement mentality, wastes should be identified for reduction through a documented and monitored part number introduction process.  Some of the more common waste elements are:

Transport: In a new part number introduction process (NPIP), transport is the movement of documentation (electronic or paper) from one department to another requiring successive reviews and sign-offs. Excess transport is a symptom of a departmentalized approach to part number start-up rather than a process flow approach.

Read the full article here.

 

Editor's Note: This article originally appeared in the March 2016 issue of The PCB Magazine.

Share

Print


Suggested Items

Technology and Development Prospects for the European Marketplace

01/18/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Tarja Rapala-Virtanen technical director of the EIPC who breaks down the current state of the European market and which technologies and market segments are seeing growth.

Top Five Takeaways from IPC APEX EXPO 2021

04/15/2021 | Chris Mitchell, IPC VP, Global Government Relations
IPC APEX EXPO 2021, which went all virtual this year, exemplified how the electronics industry has responded to the COVID-19 global pandemic: with resiliency, agility, and an unwavering commitment to build electronics better. APEX EXPO featured great content and robust discussions on topics of critical importance to the global electronics industry. From my vantage point leading IPC’s government relations programs, here are my top five takeaways from this year’s event.

Highlights on a Rousing Virtual IPC APEX EXPO 2021

04/14/2021 | Pete Starkey, I-Connect007
What a week that was! I didn’t get to endure the 11-hour flight each way, neither did I need my comfy old shoes, but it certainly was a marathon event. And real-time-plus-six-hours gave me a few late nights, but it was such a meaningful experience, and well worth the effort!



Copyright © 2022 I-Connect007. All rights reserved.