Seica to Exhibit at Semicon West Show
June 19, 2023 | SeicaEstimated reading time: 2 minutes
If you plan on attending the Semicon West show in San Francisco, CA this year, make sure you stop by the Seica booth #1561. Seica USA is an exclusive distributor for Osai Automation Systems, as well as Focused Test Inc. semiconductor test solutions. Seica has partnered up with these co-exhibitors in one large booth, with an assortment of Semiconductor handling and Power, GaN and SiC test solutions. And, as the world leader in Flying Probe test technology, Seica is where customers look for leading-edge wafer, probe card, and electronic board testing solutions.
In the spotlight – Seica’s Flying Probe Tester, Pilot VX Next >Series
The Flying Probe Tester Pilot VX Next> series represents the latest frontier in flying probe test technology; it is the complete solution for those who want maximum performance: the highest test speed, low to medium volume testing, maximum test coverage and flexibility, for prototyping, manufacturing, or repairing any type of probe card, wafer, substrate or CCA. Its vertical architecture is the optimum solution for probing both sides of the device simultaneously. Seica’s Pilot VX Next series on display will be shown testing a ceramic wafer and the same configuration is used to test the most complicated probe/MLO boards produced in the world today.
The Flying Probe Tester Pilot VX Next> series is suitable for:
- Wafer test
- Probe Card/MLO test
- Product validation testing
- Vectorless and in-circuit tests
- Programming and functional tests
- Boundary Scan test
- Medium/high volumes with automatic loader
- Highly-integrated prototypes
- High-mixed products
- Boards not designed for testing
- Reverse Engineering and Repair
In the spotlight – Focused Test, Inc. FTI 1000 and FTI2000
Focused Test Inc. announces the launch of our FTI 2000 Power IC test system which will be on display on the booth by our US distributor, Seica Inc.
FTI 2000 offers a high throughput, low cost and scalable test solution for power IC’s such as Regulators, Voltage Converters and Gate Drivers thanks to its Tester per Channel Board system architecture. FTI 2000 provides high voltage (1,000V), high current (100A) and 100 MHz digital performance needed for multisite production, engineering characterization and failure analysis test of the latest power IC’s. Its small footprint makes efficient use of valuable test floor space.
Focused Test continues to extend the range of the FTI 1000 power discrete test system to address the needs of the SiC Mosfet and GaN HEMT Wide Band Gap power markets, including higher voltage and higher current DC and UIS, Delta Vsd, and Short Circuit tests.
SEMICON West is the premier annual event for the global microelectronics industry. SEMICON West 2023 returns to Moscone Convention Center between July 11-13. This year should prove even better than the previous years due to the US government’s $280M USD investment in “The Chips and Science Act”. Please stop by at our booth #1561, David Sigillo, Vice President of Seica and his team are looking forward to welcoming you for a demo and to assist you in solving your most challenging test and automation requirements.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.