-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
SiSoft Announces OptimEye Technology for AMI Simulations
January 20, 2016 | SiSoftEstimated reading time: 3 minutes
Signal Integrity Software Inc. (SiSoft) today announced OptimEye™, which works with SiSoft’s Quantum Channel Designer (QCD) software to automatically identify the right combination of TX & RX settings to maximize a serial link’s operating margin. OptimEye identifies the ideal balance without requiring large “blind sweeps” of settings normally used to search a design space for potential solutions. This runs faster, produces less data and eliminates the need for custom scripts typically used to post-process swept simulation results. OptimEye™ runs fast enough to make generating custom equalization settings for each channel in a large system practical.
“Blind sweeps work, but they are a brute force method”, noted Barry Katz, SiSoft’s President and CTO. “The time required by blind sweeps increases with AMI model complexity, and the models we are seeing for 28G and 56G design have reached the point where blind sweeps are simply untenable. We designed OptimEye using algorithms specifically built for AMI simulation, which allowed us to maximize both optimization quality and performance. In our testing, OptimEye has equaled or beaten the solutions we found using traditional methods, in a fraction of the time. Better than 60% improvements are typical, as our technical papers illustrate.”
“We successfully used OptimEye to equalize every channel in one of our customers’ large system designs,” said Donald Telian, Consultant and Owner of SiGuys. “Balancing TX and RX equalization is no simple task, and individually balancing each channel using blind sweeps or interactive analysis is not practical on this scale. OptimEye makes this task manageable, automatic and additionally identifies the correct TX/RX settings for hardware programming.”
OptimEye simulation results will be presented as part of the sessions, “New SI Techniques for Large System Performance Tuning” on Wednesday, January 20, and “A SerDes Balancing Act: Co-Optimizing TX and RX Equalization Settings to Maximize Margin” on Thursday, January 21, at DesignCon 2016.
DesignCon 2016 is happening January 19-21, 2016 at the Santa Clara Convention Center.
Page 1 of 2
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.