EU’s Defence Industry Needs a Secure and Sustainable Materials Supply Chain
December 2, 2016 | European CommissionEstimated reading time: 2 minutes
Access to raw materials is of growing concern for the European economy. In support of the EU raw materials strategy, a new JRC study identifies the raw materials that are used in the European defence industry. It contributes to better understanding of the importance of materials supply for the defence value chain. This is in particular informing and strengthening the European Defence Action Plan published by the Commission on 30 November 2016.
The study reviewed representative defence applications and identified 47 processed and semi-finished advanced materials that are necessary for their manufacture, such as alloys, composites and compounds. Thirty nine raw materials are needed for the production of these advanced materials.
European defence industry: highly dependent on imports and critical raw materials
Nearly half of the 39 raw materials are imported to the EU and an additional quarter relies on import for more than 50% of their demand, thus raising concerns on the security of materials supply. China is major producer for one-third of the raw materials identified in the study.
Sixteen of the 39 raw materials used in defence applications are included in the EU’s critical raw materials list of 2014. Aeronautics and electronics sectors of defence industry are the most vulnerable to potential disruptions in the supply of materials.
However, the demand for raw materials in the manufacture of defence applications is relatively low. The EU lead system integrators (original equipment manufacturers) and top-tier contractors in the defence industry do not usually purchase raw materials as such, but specialised high-value processed and semi-finished materials, production of which relies on the raw materials in question.
Advanced materials crucially important to the European defence industry
The European defence industrial base requires very specialised high-performance processed materials for the production of its defence applications. The study highlights that the EU is a large manufacturer of alloys and special steels, and should maintain its production capacities. However, the EU should improve its production capacities for speciality composite materials and their precursors in order to guarantee the integrity of the materials supply.
Need to improve knowledge on materials used in the European defence sector
The report suggests a need to better understand and improve the knowledge base for the materials used in the European defence sector to develop future initiatives to ensure materials supply. This can be achieved by promoting information sharing between all relevant stakeholders and by further studying the complex materials supply chain needed by the European defence industry. The report also suggests to better exploit the dual-use potential of materials by SMEs and large companies, and to promote R&D programmes for the development of high-tech and advanced materials that can address the need of both defence and civil communities.
Suggested Items
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
TTM’s High Tech Expansion and Industry Innovation
04/30/2024 | Marcy LaRont, PCB007 MagazineTom Edman has been the CEO of TTM Technologies since 2014 and has an extensive background in electronics and manufacturing. TTM is a leading global manufacturer of technology solutions, including mission systems, RF component and RF microwave microelectronics assemblies, and quick turn and advanced technology printed circuit boards.
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.