Better Biosensors on Edge
February 16, 2017 | KAUSTEstimated reading time: 2 minutes
Using a laser to burn patterns into a polymer sheet, KAUST researchers have created graphene electrodes that act as effective biosensors.
This chemical sensor contains graphene-based electrodes that were inscribed into the underlying polymer using a laser.
Graphene is a sheet of carbon, just one-atom thick, that is strong, flexible and highly conductive. Certain molecules can trigger an electrical response when they interact with graphene, making it potentially useful as an electrochemical sensor. One way to enhance its sensitivity is to create a large, accessible surface area of graphene by coating it inside three-dimension al porous materials. However, this usually requires expensive manufacturing techniques or involves chemical binders that interfere with sensing. Despite these steps, graphene sheets often aggregate, reducing their overall surface area.
Professor of Material Science and Engineering Husam Alshareef and colleagues at the University have developed an alternative approach using a technique called laser scribing. This technique locally heats parts of a flexible polyimide polymer to 2500 degrees Celsius or more to form carbonized patterns of patches on the surface that act as electrodes.
These black patches are about 33-micrometers thick, and their highly porous nature allows molecules to permeate the material. Inside the patches, the graphene sheets have exposed edges that are very effective at exchanging electrons with other molecules. “Graphene-based electrodes with more edge-plane sites are effectively better than those relying on carbon or carbon-oxygen sites in the plane of the material,” said the postdoc in Alshareef’s group Pranati Nayak, who led the study.
The researchers added platinum nanoparticle catalysts to one of the electrodes to speed up the electrochemical reactions with other molecules. In experiments with two different test molecules, this electrode could exchange electrons hundreds of times faster than other carbon-based electrodes and showed no loss in performance over 20 cycles of testing.
The team used this graphene-based electrode to build a sensor (see image) for three biologically important molecules: ascorbic acid, dopamine and uric acid. When the molecules hit the electrode surface, they release electrons, generating a current proportional to their concentration. Crucially, each molecule’s electrochemical response was seen at a different voltage, meaning the device could measure their concentrations simultaneously and without interference.
The electrode accurately detected very small (micromolar) concentrations of the molecules, beating several rival electrodes on both sensitivity and the lower limits of detection. The researchers now hope to add traces of other atoms, such as nitrogen, to graphene to improve its sensing performance and to augment the electrodes with aptamers, short strands of DNA, RNA or peptides that bind to specific target molecules, to create new biosensors.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Exploring the Future of Surface Finishes
04/25/2024 | Real Time with...IPC APEX EXPOJoe McGurran, product marketing director for MKS Atotech, looks into the future of surface finishes, discussing less nickel, reduced thickness, technologies influencing HDI and UHDI, and the benefits of nickel-free surface finishes. He also touches on popular finishes like ENIG and palladium immersion gold and discusses the value proposition of making a change.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
NASA, Japan Advance Space Cooperation, Sign Agreement for Lunar Rover
04/11/2024 | NASANASA Administrator Bill Nelson and Japan’s Minister of Education, Culture, Sports, Science and Technology (MEXT) Masahito Moriyama have signed an agreement to advance sustainable human exploration of the Moon.
Lockheed Martin Conducts Historic LRASM Flight Test
04/04/2024 | Lockheed MartinThe U.S. Navy in partnership with Lockheed Martin [NYSE: LMT] successfully conducted a historic Long-Range Anti-Ship Missile (LRASM) flight test with four missiles simultaneously in flight.