Super Dry Launches Solder Paste Storage with Traceability


Reading time ( words)

Moisture specialist Super Dry Totech has launched new solutions for solder paste storage, bringing both temperature control and 4.0 traceability while eliminating the uncontrolled management of solder inventory.

Solder paste is a shelf-life dependent item and manufacturers recommend it be stored in a First In-First Out manner. Refrigerated storage prolongs the shelf life of solder paste and upon delivery, it should be directly placed into refrigerated storage, typically30°C for extended periods of time may no longer perform as expected. Prior to use, solder paste must be brought gently to the temperature conditions in which it will be used, which means movement to another location, for up to one day.

Newly launched Model XSDC 601 solder paste storage cabinets with network compatibility maintain an internal temperature of 2 - 20°C with little energy expenditure. Constructed from dual wall insulated stainless steel, they incorporate 40 KG capacity shelves and provide complete traceability of the storage conditions and environment history.  Maintaining tracking of paste locations and time in and out of refrigeration are also possible with additional software.

About Super Dry Totech

Delivering globally to the world’s top tier OEM and EMS companies, Super Dry Totech is the industry measure for ultra-low humidity storage and management. Proper control of moisture sensitive devices (MSDs) per IPC and JEDEC standards has become more critical than ever since the introduction of lead free. Boasting click here.

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.

The Effect of Area Shape and Area Ratio on Solder Paste Printing Performance

12/28/2017 | Stefan Härter, et al.
The ongoing miniaturization trend in the SMT production induces new challenges and highly integrated systems. In passive components, the miniaturization leads to the introduction of the EIA size 01005 or smaller. Despite numerous publications in this field already addressing the printing of such devices, a defined wholly optimized process remains unsolved and inspires further novel research ideas on this topic.



Copyright © 2018 I-Connect007. All rights reserved.