KIC to Feature SPS Smart Profiler at SMTA Ohio Expo & Tech Forum


Reading time ( words)

KIC plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled for Thursday, July 13, 2017 at the Embassy Suites Cleveland Rockside in Independence (Cleveland), Ohio. MB (Marybeth) Allen will showcase discuss how to turn your factory into a Smart Factory with KIC’s new SPS Smart Profiler reflow process inspection tool and all new KIC Vantage network insight software.

The core function of a reflow oven is to produce an acceptable profile on each PCB. The new KIC SPS smart profiler collects the profile data and compares it to the process specifications. Within seconds, the new smart profiler also suggests an improved reflow oven setup. The thermal profiler features a small compact design made with an LCP (Liquid Crystal Polymer) enclosure for better heat protection and faster cool-down between profiles.

The KIC Vantage network intelligence system is an ecosystem that automatically acquires and delivers insightful information from all the ovens in the factory in real-time to allow factories to produce consistent quality at lower costs. The software is retrofitable and can connect to the factory MES system.

About KIC

Based in San Diego, KIC is the industry leader in automated thermal process tools and systems for reflow, wave, curing and semiconductor thermal processes. The company pioneered the development of oven profilers and process optimization tools, and then worked to create the next generation of thermal systems to help manufacturers improve the thermal process quality while reducing cost.

KIC products include the KIC SPS, K2, X5, KICstart2, ProBot, 24/7 Wave and the KIC RPI. With the introduction of cutting edge tools, the company continues to stay on the leading edge of process optimization and automatic thermal process systems, and has won numerous industry awards.

For more information about KIC, click here.

Share


Suggested Items

Why You Want Your EMS Partner to Be Annoying and Boring

01/04/2018 | Neil Sharp, JJS Manufacturing
Outsourcing part or all of your manufacturing to an electronics manufacturing service (EMS) provider can be daunting. Handing over some of the control of your business can be a scary prospect.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

Video from productronica 2017: Koh Young Focuses on Total Inspection Solution

11/20/2017 | I-Connect007
At the show floor of productronica 2017, I-Connect007 Technical Editor Pete Starkey speaks with Managing Director Harald Eppinger of Koh Young Europe GmbH about the principles of Koh Young’s total 3D inspection solution for SMT process optimization and yield improvement.



Copyright © 2018 I-Connect007. All rights reserved.