iNEMI's Bill Bader to Keynote Technical Innovations Symposium at SMTA International


Reading time ( words)

Bill Bader, CEO of iNEMI, will keynote the 2017 Technical Innovations Symposium at SMTA International 2017, which will be held from September 17–21, 2017 in Rosemont, Illinois. Bader's presentation is titled "2017 iNEMI Roadmap Highlights Impacting Board Assembly over the Next 5-10 Years".

The iNEMI roadmap has become recognized as an important tool for defining the "state of the art" in the electronics industry as well as identifying emerging and disruptive technologies. The keynote presentation will discuss the major trends that will impact board and component assembly in the near future, with insights to identify potentially disruptive innovations that could be the basis for radical changes to current programs and equipment.

Bill Bader joined iNEMI in August 2009 as Chief Executive Officer. He is a 26-year veteran of Intel Corporation, and he brings to iNEMI a wide range of experience, including factory management for high-volume production, new product development, hardware and software design and test, and assembly and test technology development. He also served as Intel’s representative on the iNEMI Technical Committee from 1998 to 2005.

The Technical Innovations Symposium at SMTA International will feature new research from companies and institutions such as Celestica Inc., Centre for Mechatronics and Automation, Fraunhofer Institute, Harris Corporation, i3 Electronics, National Physical Laboratory, Plexus Corp., and more.  Session topics include Micro-Dispensing and Additive Manufacturing Developments, Adhesive and Coating Development and Characterization, Adhesive Development and Characterization, and Panel Processing Technologies for Packaging. A panel of industry experts will give short presentations and discuss current/future trends in Lead-Free and other advanced packaging technologies to wrap-up the symposium.

About SMTA - A Global Association Working at a Local Level

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.

Share


Suggested Items

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.

Tips & Tricks: What to Do if You Can't Have Reference Designators on Your Board

12/05/2017 | Duane Benson, Screaming Circuits
Sometimes, you can't have reference designators on your board. Perhaps it's because it's too densely populated and there isn't room. Or maybe, for aesthetic reasons, you've chosen to leave them off. Here's how you can address that issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.