Electrodeposited Copper Foils Market Driven by Hybrid and Electric Vehicles
October 9, 2017 | PRNewswireEstimated reading time: 2 minutes
A new report published by Persistence Market Research titled "Electrodeposited Copper Foils Market: Global Industry Analysis (2012 - 2016) and Opportunity Assessment (2017 - 2025)" studies the performance of the global electrodeposited copper foils market over an eight year assessment period from 2017 to 2025. The report presents the value and volume forecast of the global electrodeposited copper foils market and provides key insights into the factors driving market growth as well as the factors restricting market growth. As per the estimates, the global electrodeposited copper foils market is estimated to be valued at $6,664.4 million by the end of the year 2017 and is poised to touch a value of $ 16005.6 million by the end of the year 2025, registering a CAGR of 11.6% during the assessment period. In terms of volume, the consumption of electrodeposited copper foils was pegged at 384,912 tons in the year 2016 and is expected to touch a figure of 774,918 tons by the end of the year 2025, and exhibit a CAGR of 8.3% during the assessment period.
Global Electrodeposited Copper Foils Market: Segmentation and Forecast
The global electrodeposited copper foils market is segmented on the basis of thickness (50μm) and on the basis of application (Printed Circuit Boards, EMI Shielding, Batteries, Switchgear, others).
By thickness, it is estimated that >50μm segment is estimated to be valued at US$ 689.9 Mn in the year 2017 and is poised to reach a value of $1,073.8 million in the year 2025, exhibiting a CAGR of 5.7% during the forecast period.
By application, the printed circuit boards segment is estimated to be valued at $4,754.6 million in the year 2017 and is expected to reach a value of $ 11,420.9 Million in the year 2025, displaying a CAGR of 11.6% during the assessment period.
By application, EMI shielding segment is estimated to be valued at US$ 83.6 Mn in the year 2017 and is slated to reach a value of $132.2 million in the year 2025, exhibiting a CAGR of 5.9% during the assessment period.
Global Electrodeposited Copper Foils Market: Regional Forecast
Persistence Market Research tracks the performance of the global electrodeposited copper foils market across the key geographies of North America, Latin America, Europe, Asia Pacific and MEA. 5,889.4 Mn in the year 2017 and is slated to reach a value of $ 14,715.9 Mn in the year 2025, exhibiting a CAGR of 12.1% during the period of assessment. Thus, the Asia Pacific region is completely dominating the global electrodeposited copper foils market. North America electrodeposited copper foils market is estimated to be valued at US$ 431.2 Mn in the year 2017, and is poised to reach a value of US$ 741.3 Mn in the year 2025, displaying a CAGR of 7% during the forecast period.
Global Electrodeposited Copper Foils Market: Vendor Insight
The report profiles some of the leading players operating in the global electrodeposited copper foils market such as Mitsui Mining & Smelting Co., Ltd, JX Nippon Mining & Metals Corporation, Jiangxi Copper Corporation, Furukawa Electric Co., Ltd., Nan Ya Plastics Corp., Arcotech Ltd., Kingboard Copper Foil Holdings Ltd, Guangdong Chaohua Technology Co., Ltd., LS MTRON LTD and Chang Chun Petrochemical Co., Ltd. among others. The major suppliers of electrodeposited copper foils are channelizing efforts towards developing partnerships with end users, such as PCB and Battery manufacturers, in order to better address the demand and cater to exacting standards and specific requirements.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?