CyberOptics Integrates Advanced MRS Technology into New SE3000 3D Solder Paste Inspection System


Reading time ( words)

CyberOptics will demonstrate the new SE3000 3D Solder Paste Inspection (SPI) system with a proprietary Multiple-Reflection Suppression (MRS) Sensor in Hall A2, Stand 439 at productronica 2017, taking place November 14-17, 2017 at the Messe München, in Germany.

SE3000The new SE3000 3D SPI system is the very first SPI system to incorporate the industry-leading MRS sensor technology, with a finer resolution for the best accuracy, repeatability and reproducibility – even on the smallest paste deposits. The unique sensor architecture simultaneously captures and transmits multiple images in parallel, while highly sophisticated 3D fusing algorithms merge the images together, delivering microscopic image quality at production speed. Combined with the award-winning, easy-to-use software, solder paste inspection has reached a new level of precision for the most stringent requirements.

“Smaller and mobile is a key trend driving the demand for an even higher level of accuracy and resolution,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics, “We’ve optimized our proprietary MRS sensor technology that is widely used for Automated Optical Inspection applications world-wide, and integrated it into our new SE3000 SPI system to address these critical customer requirements better than any alternate solution.”

For maximum flexibility, the new SE3000-DD 3D AOI dual lane, dual sensor system caters to varying widths. This unique design provides the ability to inspect high volumes, the convenience of inspecting different board sizes simultaneously on different lanes, or even switching from dual lane to single lane mode to inspect very large boards.

At productronica Germany, CyberOptics will also unveil the new SQ3000 3D CMM system and the new SQ3000-DD™ 3D AOI system, both powered by MRS technology.

Share


Suggested Items

Improving Design, Manufacturing and Assembly Teamwork

01/15/2018 | Syrma Technology
Many electronics manufacturers tend to compartmentalize or "silo" their departments, such as the design team versus assembly-related functions. The relationship between design and manufacturing can too often be disconnected or otherwise poor, which stalls productivity and increases bottom-line costs. By identifying and addressing these gaps, this financial hemorrhage can be reduced, and profitability increased.

Recent Innovations in DFMA

01/10/2018 | Syrma Technology
Software, electronics and sensors are making their way into the world of product design. New composites, plastics and alloys are replacing traditional metals. Designs are even reducing the carbon footprint of manufacturers, and more products can be recycled when they reach the end of their use.

Blockchain for Manufacturing: What are the Opportunities?

11/17/2017 | Neil Sharp, JJS Manufacturing
Blockchain is one of the hottest topics in the tech world, and a buzzword that’s been popping up quite a bit over the last year or so. It is said to have the potential to radically simplify many business processes, by reducing risk and boosting transparency. In the manufacturing world, what are its opportunities?



Copyright © 2018 I-Connect007. All rights reserved.