Smart Heat Control of Microchips
March 5, 2018 | KITEstimated reading time: 2 minutes
Miniaturization of computer chips is a perfect gateway for attacks by hackers: Microchips are highly sensitive and might be destroyed physically by specific overloading. Researchers of Karlsruhe Institute of Technology have now demonstrated that monitoring of the processors’ thermal patterns allows conclusions to be drawn with respect to manipulative control commands. This might give rise to a new generation of computer chips with integrated intelligent monitoring systems that self-adapt to new threats.
Technological progress in the electronics sector, such as higher speeds, reduced costs, and smaller sizes, result in entirely new possibilities of automation and industrial production, without which “Industry 4.0” would not be feasible. In particular, miniaturization advanced considerably in the last years. Meanwhile, physical flow of a few electrons is sufficient to execute a software. But this progress also has its dark side. Processors for industrial production of less than 10 nm in dimension are highly sensitive. By specific overloading through incorrect control commands, hackers might initiate an artificial aging process that will destroy the processors within a few days. To defend such attacks on industrial facilities in the future, researchers of KIT are now working on a smart self-monitoring system.
The new approach is based on identifying thermal patterns during normal operation of processors. “Every chip produces a specific thermal fingerprint,” explains Professor Jörg Henkel, who heads the team at the Chair for Embedded Systems (CES). “Calculations are carried out, something is stored in the main memory or retrieved from the hard disk. All these operations produce short-term heating and cooling in various areas of the processor.” Henkel’s team monitored this pattern with sensitive infrared cameras and reproduced changes in the control routine from minimum temperature changes or temporal deviations of a few milliseconds. The setup with infrared cameras was used to demonstrate feasibility of such thermal monitoring. In the future, sensors on the chip are planned to assume the function of the cameras. “We already have temperature sensors on chips. They are used for overheat protection,” Jörg Henkel says. “We will increase the number of sensors and use them for cyber security purposes for the first time.” In addition, the scientists want to equip the chips with neural networks to identify thermal deviations and to monitor the chip in real time.
The researchers think that their smart heat control will be applied in industrial facilities first. As mostly static control routines are executed, deviations are easier to identify than in a smartphone, for instance. However, also industry computers are exposed to dynamic threats. “As soon as the hackers will know that we monitor temperature, they will adapt,” computer scientist Hussam Amrouch, who works in the team of Jörg Henkel, explains. “They will write smaller or slower programs, whose heating profiles will be more difficult to identify.” Right from the start, the neural networks will therefore be trained to identify even modified threats.
Suggested Items
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
The Chemical Connection: Reducing Etch System Water Usage, Part 1
04/05/2024 | Don Ball -- Column: The Chemical ConnectionWater conservation has become an important component of the overall system design for most manufacturing operations today. Changing climate conditions and increasing populations are beginning to strain the freshwater supplies in many areas of the country. As a result, as equipment suppliers, we see an increasing number of requests for options that reduce water usage in proposed wet processing systems. Etching systems tend to use more water because of the need for close temperature control to maintain steady etch rates and the rinsing requirements for complete removal of corrosive etchants from the surface of the product before the next process step. This column contains some simple suggestions for reducing water usage in etch systems that won’t strain the budget too much.
Indium’s Sze Pei Lim to Present on Semiconductor Packaging at ICEP Japan
04/02/2024 | Indium CorporationIndium Corporation’s Senior Global Product Manager for Semiconductor and Advanced Materials, Sze Pei Lim, is scheduled to present at the International Conference on Electronics Packaging (ICEP 2024).
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Indium Corporation to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
02/28/2024 | Indium CorporationAs a materials pioneer and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 20-22, in Shanghai.