Using Light for Next Generation Data Storage
July 3, 2018 | University of AdelaideEstimated reading time: 2 minutes
Tiny, nano-sized crystals of salt encoded with data using light from a laser could be the next data storage technology of choice, following research by Australian scientists.
The researchers from the University of South Australia and University of Adelaide, in collaboration with the University of New South Wales, have demonstrated a novel and energy-efficient approach to storing data using light.
“With the use of data in society increasing dramatically due to the likes of social media, cloud computing and increased smart phone adoption, existing data storage technologies such as hard drive disks and solid state storage are fast approaching their limits,” says project leader Dr. Nick Riesen, a Research Fellow at the University of South Australia and Visiting Fellow at the University of Adelaide’s Institute for Photonics and Advanced Sensing (IPAS).
“We have entered an age where new technologies are required to meet the demands of 100s of terabyte (1000 gigabytes) or even petabyte (one million gigabytes) storage. One of the most promising techniques of achieving this is optical data storage.”
Dr. Riesen and University of Adelaide PhD student Xuanzhao Pan developed technology based on nanocrystals with light-emitting properties that can be efficiently switched on and off in patterns that represent digital information. The researchers used lasers to alter the electronic states, and therefore the fluorescence properties, of the crystals.
Their research shows that these fluorescent nanocrystals could represent a promising alternative to traditional magnetic (hard drive disk) and solid-state (solid state drive) data storage or blu-ray discs. They demonstrated rewritable data storage in crystals that are 100s of times smaller than that visible with the human eye.
“What makes this technique for storing information using light interesting is that several bits can be stored at simultaneously. And, unlike most other optical data storage techniques, the data is rewritable,” says Dr. Riesen.
This ‘multilevel data storage’—storing several bits on a single crystal—opens the way for much higher storage densities. The technology also allows for very low-power lasers to be used, increasing its energy efficiency and being more practical for consumer applications.
“The low energy requirement also makes this system ideal for optical data storage on integrated electronic circuits,” says Professor Hans Riesen from the University of New South Wales.
The technology also has the potential to push forward the boundaries of how much digital data can be stored through the development of 3D data storage.
“We think it’s possible to extend this data storage platform to 3D technologies in which the nanocrystals would be embedded into a glass or polymer, making use of the glass-processing capabilities we have at IPAS,” says Professor Heike Ebendorff-Heidepriem, University of Adelaide. “This project shows the far-reaching applications that can be achieved through transdisciplinary research into new materials.”
Dr. Riesen says: “3D optical data storage could potentially allow for up to petabyte level data storage in small data cubes. To put that in perspective, it is believed that the human brain can store about 2.5 petabytes. This new technology could be a viable solution to the great challenge of overcoming the bottleneck in data storage.”
Suggested Items
Micross, Sital Announce Global Manufacturing & Distribution Partnership
05/07/2024 | Micross Components, Inc.Micross Components, Inc., a leading global provider of mission-critical microelectronic components and services for high-reliability aerospace, defense, space and industrial applications, is pleased to announce our exclusive partnership with Sital Technology (sitaltech.com), the leader in MIL-STD-1553 IP cores, specializing in integrated FPGA solutions.
Real Time with… IPC APEX EXPO 2024: Innovative Lamination Technology
05/07/2024 | Real Time with...IPC APEX EXPOKevin Barrett of Insulectro and Victor Lazaro of Indubond discuss their companies' partnership, focusing on Indubond's innovative lamination technology that uses induction heating. They discuss the advantages of this technology over traditional methods, its benefits to customers, and the crucial role of automation in manufacturing.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.
BrainChip, Frontgrade Gaisler to Augment Space-Grade Microprocessors with AI Capabilities
05/06/2024 | BUSINESS WIREBrainChip Holdings Ltd, the world’s first commercial producer of ultra-low power, fully digital, event-based, neuromorphic AI IP, and Frontgrade Gaisler, a leading provider of space-grade system-on-chip solutions, announce their collaboration to explore the integration of BrainChip’s AkidaTM neuromorphic processor into Frontgrade Gaisler’s next generation fault-tolerant, radiation-hardened microprocessors.