Electrolube Launches Protection Solutions for Mobile Phone and Touchscreen Makers in India


Reading time ( words)

Electrolube has launched a new range of electronics protection solutions for Indian mobile phone and touchscreen device manufacturers seeking high quality sealants, adhesives, protective coatings and EMI shielding material.

With an established manufacturing facility in Bangalore, Electrolube India is able to offer local manufacturers the advantages of a reliable supply infrastructure, plus short lead times for an extensive range of electro-chemical products, designed to maximise the reliability and mechanical resilience of mobile devices.

Five categories of products have been specially formulated to aid the assembly of touchscreens and to maximise their physical protection and electrical performance. They include form-in-place EMI shielding compounds; silver conductive adhesives; special display coatings; thermally conductive putty and a UV cured, corrosion resistant adhesive coating.

The two conductive form-in-place gasket materials, FIP200 and FIP210, are fast curing, metal filled compounds that provide continuity of electromagnetic shielding at joints and between the mating interfaces of product casings. Both materials offer high levels of corrosion resistance, as well as being highly conformable with low deflection force.

SCPE is the latest in a new generation of silver conductive adhesives from Electrolube that provides an excellent bond, as well as effective shielding performance, all from a single product. Developed for use in applications such as liquid crystal module displays, SCPE is very quickly dispensed, fast curing and offers genuine long term reliability.

Special Display Coating SDC provides an ultra-thin protective film for the surfaces of LCD displays and at the same time protects the polarizer against oxygen and moisture permeation. It has a fast cure at room temperature and is easily removed for rework or repair.

TCP400.jpgThe thermally conductive putty TCP400 is a two-component silicone thermal gel offering high thermal conductivity and good thermal cycling performance while delivering excellent shock and vibration protection. Capable of filling a larger gap than is possible with a thermal grease or thermal pads, TCP400 does not pump out on application and can be applied either manually or automatically using production line dispensing equipment.

UVA is a UV cured adhesive coating for liquid crystal module displays that forms a thin corrosion protective film over exposed areas of the display. Film distribution is guaranteed thanks to the adhesive's excellent wettability to a wide range of substrates, and its adhesion is moderated to enable easy rework.

Mobile phones and tablets have seen a huge boom over the last decade, with the number of registered handsets almost matching the total world’s population. Electrolube has been at the forefront of this expansion, supporting manufacturers in their quest to make more reliable, and more resilient mobile technology. The Electrolube range is used throughout every aspect of the mobile network, including the latest high-street handset as well as the support network of antennas and relays. For further information, please click here.

Share


Suggested Items

I-Connect007 Survey: Inspection Systems to See Increasing Use of 3D Technology

10/31/2018 | Stephen Las Marias, I-Connect007
There is a critical need for inspection in the PCB assembly industry amid the continuing trend towards miniaturization in electronic systems and devices. Further, as solder joints become smaller and fine pitch becomes denser, the use of 3D technologies in inspection systems is becoming a must to help improve the quality and reliability of tests.

Do's and Don'ts of Thermal Management Materials

10/17/2018 | Jade Bridges, Electrolube
Selecting a thermal management material that is broadly applicable to a particular electronic assembly and its predicted operating conditions is a good starting point; however, as with many of these things, the devil is very much in the details! Find out the key considerations in choosing your materials.

Tips to Improve Soldering Tip Life and Reduce Cost

10/10/2018 | Thermaltronics
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.



Copyright © 2018 I-Connect007. All rights reserved.