RTW NEPCON South China: Mycronic Discusses Industry 4.0


Reading time ( words)

At the recent NEPCON South China 2018 event in Shenzhen, Clemens Jargon, VP for Global Dispensing and Asia at Mycronic, discusses the challenges that customers face on their journey towards Industry 4.0, and how Mycronic is addressing these issues.

From jet printing to solder paste inspection, to pick-and-place, Jargon talks about their total solutions that aim to help customers take their production to the next level.

Watch the interview here.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products. The primary inputs in the SMT stencil manufacturing process are material, equipment, and processes, and by continuously improving these inputs, the overall print process is improved. The most important material in the process of manufacturing SMT stencils is the foil itself. This article investigates foil types used with the goal of determining which foils provide the best print performance.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Tips & Tricks: Humidity Level for Electronics Assembly

04/10/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Low relative humidity (RH) can allow for higher static charges to build on objects. It can also affect solder pastes, especially OR-class pastes, and this can reduce print performance and stencil life. Read on to find out what level of RH you need for your assembly facility.



Copyright © 2019 I-Connect007. All rights reserved.