Molecular Memory Can be Used to Increase the Memory Capacity of Hard Disks
October 19, 2018 | University of JyväskyläEstimated reading time: 2 minutes
Researchers at the University of Jyväskylä have taken part in an international British-Finnish-Chinese collaboration where the first molecule capable of remembering the direction of a magnetic above liquid nitrogen temperatures has been prepared and characterized. The results may be used in the future to massively increase the storage capacity of hard disks without increasing their physical size.
Molecular Memory Can be Used to Increase the Memory Capacity of Hard Disks
Single-molecule magnets are molecules capable of remembering the direction of a magnetic field that has been applied to them over relatively long periods of time once the magnetic field is switched off. Thus, one can “write” information into molecules. Single-molecule magnets have potential applications, for example, as high-density digital storage media and as parts of microprocessors in quantum computers. Practical applications have, however, been greatly hindered by the fact that single-molecule magnets are operational only at extremely low temperatures. Their intrinsic memory properties often vanish if they are heated more than a few degrees above absolute zero (–273°C); therefore, single-molecule magnets can be only studied under laboratory conditions by cooling them with liquid helium.
More Favorable Conditions for Technological Applications
Researchers have now, for the first time, managed to synthesize and characterize a single-molecule magnet which retains its memory properties above the temperature of liquid helium (–196°C). The magnet can be called the first high-temperature single-molecule magnet.
- When considering our everyday life, liquid nitrogen is extremely cold. However, compared to liquid helium, which has so far been required to study single-molecule magnets, the liquid nitrogen temperature is a huge leap upwards. Liquid nitrogen is more than 300 times cheaper than liquid helium and much more readily available, enabling technological applications. Therefore, the research constitutes an important scientific milestone, describes postdoctoral researcher Akseli Mansikkamäki from the Department of Chemistry of the University of Jyväskylä.
New Insights from Computations
The new dysprosium metallocene compound is the culmination of several years of research. The project has required the development of new approaches in organometallic lanthanide chemistry and deep insights of the relationship between the microscopic electronic structure and magnetic properties of the studied systems.
- Computational methods based on quantum mechanics and the theory of relativity play an important role in the characterization and design of new single-molecule magnets. The large computational resources available today have enabled, for example, to clarify the interaction between crystal vibrations and the electronic structure of molecules studied in the present work, Mansikkamäki explains.
The research also provides new insights and guidelines how to further improve the magnetic properties of single-molecule magnets and how to bring technological applications closer to reality.
The research project has been led by professor Richard Layfield at the University of Sussex, UK. The synthetic work and characterization of the prepared compounds was carried out at Layfield’s research group and magnetic measurements were performed at Sun Yat-sen University, Guangzhou , PRC under the leadership of professor Ming-Liang Tong. Postdoctoral researcher Akseli Mansikkamäki carried out theoretical calculations and analyses at the Department of Chemistry of the University of Jyväskylä. In Finland, the research has been financed by the Academy of Finland. Computational resources were provided by the CSC-IT Center for Science and the University of Jyväskylä.
Suggested Items
Flex Announces Upcoming Changes to Its Board of Directors
05/07/2024 | FlexFlex announced that consistent with its succession plan, Michael D. Capellas, non-executive Chair of the Board of Directors of Flex, has informed the Board of his decision not to stand for re-election to the Board at the company's 2024 Annual General Meeting of shareholders to be held on August 8, 2024. Mr. Capellas has served on the company's board for 10 years, including as Chair since 2017, during which time he played a key role in building Flex's reputation as a trusted global technology, supply chain and manufacturing solutions partner and driving the company's success.
Europlacer Presents New Range of iineo SMT Placement Machines.
05/01/2024 | EuroplacerFor more than 15 years, the Europlacer iineo placement machines have made their mark on the SMT industry with unique features and unrivalled flexibility. Today, Europlacer announces the launch of the second generation iineo.
Incap US Hosts Annual Food Drive
04/30/2024 | IncapIncap US recently concluded its annual food drive, a tradition aimed at supporting the Greater Washington County Food Bank. This year marked the fourth year of the initiative, and we couldn’t be prouder of the collective effort that was made to its success.
Scanfil Uses Employee Engagement Survey to Improve
04/30/2024 | ScanfilOnce a year Scanfil arranges Employee Engagement Survey (EES) in order to get valuable insight from its employees. In EES all employees are invited to share their opinion, bring ideas for improvements, and contribute to making Scanfil a better place to work.
epoxySet Introduces EO-20E – Versatile, Electrically Conductive Epoxy
04/29/2024 | epoxySetepoxySet produces EPOXIOHM EO-20E an industry established, reliable electrically conductive epoxy designed for solder replacement, chip bonding and other intricate electronic and optoelectronic assemblies. This creamy paste has a an easy to use 1:1 mix ratio with a 48 hour work time.