ASTM International and Innovate UK Partner to Develop International Additive Manufacturing Standards
January 9, 2019 | ASTM InternationalEstimated reading time: 2 minutes
Global standards organization ASTM International and three United Kingdom-based entities are partnering to fast-track the creation of technical standards needed by the additive manufacturing industry.
ASTM International’s Additive Manufacturing Center of Excellence—in which the UK-based Manufacturing Technology Centre (the MTC) is a founding partner—identified three potential areas for standardization. The effort will be supported through a £300,000 investment from Innovate UK (a UK government agency) to BSI (British Standards Institution) in partnership with ASTM International.
“Innovate UK is pleased to support the creation of Publicly Available Specifications to help drive economic growth through innovation in high-value manufacturing,” said Robin Wilson, the innovation lead for high value manufacturing at Innovate UK. “This is a smart partnership that brings together UK expertise in key areas of additive manufacturing along with the infrastructure and leadership of ASTM International and its young center of excellence.” Wilson is on the advisory board of the center of excellence.
BSI will coordinate the development of the three standards, which are focused on directed energy deposition (DED), one of seven categories of additive manufacturing as defined by ASTM International and the International Organization for Standardization (ISO/ASTM 52900). DED uses focused thermal energy (e.g., laser, electron beam, plasma arc) to fuse materials by melting as they are being deposited.
ASTM International’s global additive manufacturing director, Dr. Mohsen Seifi, notes that DED technology offers unique advantages related to speed and build-envelope limitations. However, he adds, “DED is not as widely used nor understood as some of the other additive manufacturing processes. Lack of standards are quite evident.”
“Among their many benefits, these new standards have the potential to help manufacturers and suppliers make products with consistent and reliable quality,” he said.
The three DED standards under development are:
1. A specification for using wire as a DED feed-stock, helping address key requirements including composition, dimensional tolerances, contamination, packaging, handling, and storage;
2. A standard for nondestructive testing (NDT) which aims to address typical causes and natures of DED defects while also reviewing traditional test methods for applicability to DED; and,
3. A standard for DED wire-and-arc additive manufacturing (WAAM), which aims to cover terminology, material opportunities and restrictions, geometrical constraints, finishing requirements, inspection, and more.
The MTC, home of the UK’s National Centre for Additive Manufacturing, has supported this Publicly Available Specifications activity through the initial consultation process, selection of suitable topics for consideration, and identification of potential partners to form the committees. It will continue to provide support through the development of the Publicly Available Specifications and subsequent international standards.
In addition to the organizations already mentioned, more than a dozen private companies are supporting the collaboration, including Airbus, GE, GKN, BAE Systems, Rolls-Royce, and many others.
After the Publicly Available Specifications are created through BSI, ASTM International’s committee on additive manufacturing technologies (F42) plans to develop international standards based on each through a new licensing agreement. Notably, ASTM International has a preexisting partner standards development organization agreement (PSDO) with the International Organization for Standardization (ISO) in additive manufacturing which allows for creation of joint ASTM International/ISO standards. BSI, as the UK member of ISO, will be able to adopt these international standards as the UK national standard.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.