Lasers Make Magnets Behave Like Fluids
April 19, 2019 | University of Colorado BoulderEstimated reading time: 3 minutes
For years, researchers have pursued a strange phenomenon: When you hit an ultra-thin magnet with a laser, it abruptly de-magnetizes. Imagine the magnet on your refrigerator suddenly falling off.
Now, scientists at CU Boulder are digging into how magnets recover from that change, regaining their properties in a fraction of a second.
According to a study published this week in Nature Communications, zapped magnets actually behave like fluids. Their magnetic properties begin to form “droplets,” similar to what happens when you shake up a jar of oil and water.
To find that out, CU Boulder’s Ezio Iacocca, Mark Hoefer and their colleagues drew on mathematical modeling, numerical simulations and experiments conducted at Stanford University’s SLAC National Accelerator Laboratory.
“Researchers have been working hard to understand what happens when you blast a magnet,” said Iacocca, lead author of the new study and a research associate in the Department of Applied Mathematics. “What we were interested in is what happens after you blast it. How does it recover?”
In particular, the group zeroed in on a short but critical time in the life of a magnet—the first 20 trillionths of a second after a magnetic, metallic alloy gets hit by a short, high-energy laser.
Iacocca explained that magnets are, by their nature, pretty organized. Their atomic building blocks have orientations, or “spins,” that tend to point in the same direction, either up or down—think of Earth’s magnetic field, which always points north.
Image caption: Magnetic "droplets" juxtaposed with image of oil and water.
Except, that is, when you blast them with a laser. Hit a magnet with a short enough laser pulse, Iacocca said, and disorder will ensue. The spins within a magnet will no longer point just up or down, but in all different directions, canceling out the metal’s magnetic properties.
“Researchers have addressed what happens 3 picoseconds after a laser pulse and then when the magnet is back at equilibrium after a microsecond,” said Iacocca, also a guest researcher at the U.S. National Institute of Standards and Technology (NIST). “In between, there’s a lot of unknown.”
The Unknown
It’s that missing window of time that Iacocca and his colleagues wanted to fill in. To do that, the research team ran a series of experiments in California, blasting tiny pieces of gadolinium-iron-cobalt alloys with lasers. Then, they compared the results to mathematical predictions and computer simulations.
And, the group discovered, things got fluid. Hoefer, an associate professor of applied math, is quick to point out that the metals themselves didn’t turn into liquid. But the spins within those magnets behaved like fluids, moving around and changing their orientation like waves crashing in an ocean.
“We used the mathematical equations that model these spins to show that they behaved like a superfluid at those short timescales,” said Hoefer, a co-author of the new study.
Wait a little while and those roving spins start to settle down, he added, forming small clusters with the same orientation—in essence, “droplets” in which the spins all pointed up or down. Wait a bit longer, and the researchers calculated that those droplets would grow bigger and bigger, hence the comparison to oil and water separating out in a jar.
“In certain spots, the magnet starts to point up or down again,” Hoefer said. “It’s like a seed for these larger groupings.”
Hoefer added that a zapped magnet doesn’t always go back to the way it once was. In some cases, a magnet can flip after a laser pulse, switching from up to down.
Engineers already take advantage of that flipping behavior to store information on a computer hard drive in the form of bits of ones and zeros. Iacocca said that if researchers can figure out ways to do that flipping more efficiently, they might be able to build faster computers.
“That’s why we want to understand exactly how this process happens,” Iacocca said, “so we can maybe find a material that flips faster.”
The research was partly supported by the U.S. Department of Energy, Basic Energy Sciences.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Mycronic Receives Order for an SLX Mask Writer
04/11/2024 | MycronicMycronic AB has received an order for an SLX mask writer from a new customer in Asia. The order value is in the range of USD 7-9 million. Delivery of the system is planned for the second quarter of 2025.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
MKS’ Atotech, ESI to Participate in IPC APEX EXPO
03/29/2024 | MKS’ AtotechMKS’ Atotech and ESI will participate in this year’s IPC APEX EXPO 2024, the PCB industry’s largest event in North America, to be held in Anaheim, California, to be held from April 6-11 2024 at the Anaheim California Convention Center.