Atomically Thin Minerals Show Promise as Proton Conducting Membranes for Green Technologies
September 3, 2019 | University of ManchesterEstimated reading time: 2 minutes
Researchers at the University of Manchester discovered that atomically-thin micas—the name given to a type of common mineral found in soil—are excellent proton conductors. This surprising result is important for the use of 2D materials in applications such as fuel cells and other hydrogen-related technologies.
Previously, the Manchester researchers led by Professor Andre Geim and Dr Marcelo Lozada-Hidalgo found that one-atom thick materials like graphene are highly permeable to protons, nuclei of hydrogen atoms. However, they also found that other 2D materials such as molybdenum sulphide (MoS2), that were just three atoms thick, were completely impermeable to protons. These results suggested that only one-atom thick crystals could be permeable to protons.
Writing in Nature Nanotechnology, the team have shown that protons can easily permeate through few-layered micas despite the fact that they are 10 times thicker than graphene. Micas, like graphite, consist of crystal layers stacked on top of each other and can be sliced down to a single layer. The team isolated one of these layers and found that it was 100 times more permeable to protons than graphene.
At first glance, this result seems impossible because micas are too thick for protons to permeate—they are much thicker than monolayer MoS2 that is completely impermeable to protons. However, micas can be thought of as crystal slabs pierced by tubular channels. These channels aren’t empty but filled with hydroxyl groups that are like the proton-conducting one-dimensional chains in water. Protons jump along these chains, turning the material into an excellent proton conductor.
There is a lack of proton-conducting materials that can reliably operate between 100°C and 500°C. However, this is the sweet spot temperature range for optimum operation of fuel cells and other hydrogen technologies. Atomically-thin micas work rather well in this temperature range—they merit attention from this perspective.
Lucas Mogg, a PhD student on the project and the first author of the paper said: “We found that proton conductivity in atomically-thin micas is 10 to 100 times higher than in graphene. It is encouraging because graphene is already being considered as a promising proton conducting material. Our results show micas could be even more promising—not least because they are abundant and inexpensive.”
Professor Andre Geim said: “The result also implies that many other 2D materials could be turned into proton conductors. Our strategy is not limited to protons or micas. Many more 2D crystals with atomic-scale channels similar to those in micas could be explored, hopefully bringing unexpected phenomena and new applications in the field of proton and ionic conductors.”
The researchers also found that micas become particularly highly conductive in a temperature range that has been notoriously inaccessible for the related technologies.
Dr Marcelo Lozada-Hidalgo said: “There is a lack of proton-conducting materials that can reliably operate between 100°C and 500°C. However, this is the sweet spot temperature range for optimum operation of fuel cells and other hydrogen technologies. Atomically-thin micas work rather well in this temperature range—they merit attention from this perspective.”
Furthermore, the researchers say they are now working on building a mica prototype membrane that is big enough to be tested under industrial conditions. They are also optimistic about the possibilities this research open in terms of fundamental research. The work shows that the field of two-dimensional ionic conductors holds great promise due to the wealth of other crystals that could be turned into ionic and proton conductors.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.