Molex Joins Single Pair Ethernet Industrial Partner Network
May 13, 2020 | MolexEstimated reading time: 1 minute
Molex announced that it has joined the SPE (Single Pair Ethernet) Industrial Partner Network, which brings together industry leading companies to promote and support adoption of SPE technology as the basis for rapid growth of IIoT (Industrial Internet of Things).
“IIoT and Industry 4.0 are driving new standards in wired connectivity for smart factories, which require fast and reliable data transmission from devices to the cloud. At the same time, demand is on the rise for compact, space-saving and lighter weight industrial infrastructure,” said Johann Ried, global product manager, Molex.
SPE technology addresses these trends by utilizing one twisted pair copper wires to transmit data at distances up to 1,000 meters—thereby delivering greater speed, miniaturization and design flexibility in industrial automation applications. Based on industry standard IEC 63171-6, industrial SPE solutions are in accordance with IEEE 802.3 for uniform Ethernet transmission standards. This standardization makes it possible for the first time to use Ethernet to process data from industrial devices to gain more efficient and seamless integration into existing Ethernet infrastructures.
Being a member of the innovative SPE Industrial Partner Network also enables Molex to fortify its innovative Industrial Automation Solution 4.0 (IAS4.0). Molex’s IAS4.0 is an end-to-end solution from sensors to analytics to enterprise applications. This includes simple to complex devices such as controllers, gateways and IO modules as well as platforms to develop cloud-based applications.
“Our collaboration with the SPE Industrial Partner Network strengthens our commitment to advancing SPE as a future infrastructure solution for IIoT and shaping our vision for Industrial IAS4.0,” Ried concluded.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?