-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Real Time with… SMTAI 2020: Insituware Offers Handheld Process Controls for the Smart Factory
September 21, 2020 | Real Time with...SMTAIEstimated reading time: 8 minutes
Nolan Johnson speaks with Insituware CEO and Chief Engineer Michael Frederickson. Insituware’s expertise in materials control and measurement brings some innovative new handheld measurement devices to the manufacturing floor. Mike and Nolan discuss how these new devices contribute to accuracy, compliance, and real-time process optimization—all key factors in the smart factory environment. Mike also teases what the company will demonstrate in their virtual booth at SMTAI.
View more videos and show-related content at Real Time with… SMTAI 2020 virtual.
Prefer to read this content? We've transcribed this conversation below.
Nolan Johnson: Hi, Nolan Johnson here for Real Time with.. SMTAI. Today, I’m speaking with Mike Fredrickson. Mike, you are the CEO and chief scientist/engineer for Insituware. Welcome.
Mike Frederickson: Thank you.
Johnson: Insituware is going to be present at SMTAI this year. Can you tell us a little bit about what you, your role, and what Insituware does?
Frederickson: Sure. I actually lead the company and operate as its chief engineer. Basically, what Insituware does is we are a company that takes various pillars of capability and creates a solution to control materials in situ or while you’re using the materials in various settings.
For the electronics industry, which is our first entree into controlling materials, specifically what we do is we measure materials. We measure them from the perspective of as they come into the factory. We measure them as they’re being used to ensure that the materials are behaving the way that we have specified those materials to behave for our particular product and the way that we want to manufacture with those materials.
Johnson: What sorts of materials, Mike?
Frederickson: For the materials that we’re looking at in electronics, we’re starting with soldering materials. We’re starting with solder paste specifically. The reason why we started with solder paste is twofold. One is that solder paste actually accounts for a large number of defects in manufacturing. It’s a material that is highly dynamic. It’s a material that we put a lot of demands on. It’s a material that has to be very theologically dynamic. It has to be under stress. It has to be able to alter its viscosity, yet it has to have a consistent viscosity throughout the day in the life of a solder paste on a factory floor in a single day. We want it to maintain its viscosity, and then we want it to reflow. We want to make sure that the powder is still engaging with the flux media and that it’s actually going to reflow. That’s the first reason; it’s probably the principally most dynamic material we use in electronics in the manufacturing of electronic products.
The second reason is we’re using research that was actually done by the Navy 25 years ago. In fact, in a previous life, I actually ran all of that research for the Navy, where we were looking at solder paste. We spent a considerable amount of money. Twenty-five years ago, solder paste was a whole lot different than what it is today. It’s a lot more stable today than it was 25 years ago. But 25 years ago, in the Defense Department, and specifically the Navy, we were very concerned about the reliability, much like we were concerned about the reliability of SMT. If you can remember, a lot of money from the Defense Department went into the reliability of SMT early on just because of the failures we were seeing.
This was an additional effort that we were putting in that. We had millions of dollars in research that was available to the public in the public domain that we took advantage of and our ability to measure phenomenon within solder paste that drives its performance. That’s what we’re measuring. We are actually taking analytical measurements of solder paste, looking deep inside what’s actually happening inside the solder paste, and then we’re using that information then to control it.
Johnson: Give me a quick mental image, a visual, on your product. Is this floor-based, desktop, or handheld?
Frederickson: Excellent question. What we wanted to do is actually miniaturize and make this capability very mobile. Actually, if you look at our website, you’ll see this handheld unit. In fact, we actually had two or three industrial artists, which actually had a bit of a competition, and this is where they ended up. Ergonomically, we had to be able to put a lot. There’s a significant amount of computational capability that has to exist in this. It’s packed full of a lot of capability analytically and is capable of making analytical measurements, electrochemical measurements specifically. But it also has the computing power to be able to do all of the analysis that needs to be done. It’s a handheld unit. One of the things that we also wanted to do is we knew that we weren’t just going to be testing solder paste.
Frederickson: That was just going to be one. This is going to be one out of, in the future, probably hundreds of different materials across various industries that we’re going to be looking at—within the electronics industry, probably 20 or 30 different materials specifically. The way this works is that there’s a cartridge that fits in the top. The cartridge works with an app. It’s very similar to your phone if you wanted to buy a gadget that plugs into your phone. This device is a lot more sophisticated than that, but basically, the idea is you put a cartridge—we call it an insight module—and with that and an app, you can look at a new material. In some cases, the cartridge actually works across many different materials. As an example, solder paste we’re looking at now. Conformal coating is our next. It’s actually going to follow solder paste by two months, right at the end of the year.
What we’re able to do with conformal coating is that the same conformal coating. What do I mean? Is that the same percent solids? Is that have the same constituents of the material that you were putting on before? We can actually measure the cure rate. We can actually measure what happens as that conformal coating is curing. We can actually track the cure mechanisms. If you think about coating a particular device, you can actually say, number one, is this the same material? You’re going to see this common trend. If I’m trying to control materials, the first thing is, is this the same material I specified? Is this the same material that I designed with? What we find, and I think that’s part of an education for us to explain this to the industry, with solder paste and conformal coatings, if your environment changes its humidity, I promise you that you’re going to be manufacturing with different materials.
We see it in our lab. We see it across the board, and people that have experience with humidities that are changing from 30 to 60%, people that are used to using solder paste will swear to that also because they see the differences. They see how it changes.
Johnson: This application, your equipment, just seems to scream out plugging into Industry 4.0 and providing process feedback to the overall system for what’s going on with those shelf-life materials.
Frederickson: Yes, that’s exactly it. When we look at Industry 4.0, and we look at, we want to control the machines. We want to keep track of the machines. If you think about, I actually call it the electronics manufacturing dichotomy. We control everything except the thing that changes. The machines are built not to change. They have tolerances, don’t get me wrong, but machines are built and designed not to change. Materials are designed to change in effect, right? They’re going to state change if it’s a solder paste. It’s going to cure if it’s a coating. It’s going to cure if it’s an adhesive or if it’s an underfill. It’s very interesting in that when we look at Industry 4.0, it’s the one area that isn’t getting attention. We hope that by us applying this capability into the industry, we will tap right in. We are tied right into the cloud.
We’re tied right in. We do have online capability, so you can actually make a measurement within the device itself, but then it connects to the cloud. Not only are you able to track your materials, but because of our cloud function, we’re able to benchmark, too. If you’re using a material, this is the most important to me because I spent a lifetime in manufacturing. And if I look at components, or I look at how other people use particular devices, the whole benchmarking concept is with the way that I’m using the materials, am I optimizing my use of these materials? Because that ties right to the efficiencies of manufacturing. It ties right to my yields. That’s what we also offer people—the stencil life of a solder paste. If you’re getting five-hour stencil life with a particular material, if the rest of the industry using that same material is getting 10 hours of stencil life, it’s not the material you picked; it’s how you’re using it. It gives you an opportunity to improve.
Johnson: There are lots of opportunities to find ways to optimize your performance on your manufacturing floor for yourself. Now, of course, I just said show floor because you’re going to be exhibiting on the virtual show floor at SMTAI, is that correct?
Frederickson: Yes, we are.
Johnson: If somebody is interested in this, and in listening to this interview wants to follow up with you at your virtual booth, they can stop by and check in with you.
Frederickson: Absolutely. We’ll be doing demos for SMTAI. We’ll be doing demos of solder paste, for the most part. We’ll be able to show how we actually measure. Because it’s so dynamic, the one demo I do for everybody is I just pull out some solder paste, make a measurement, and then work the solder paste for a couple of minutes, and you see the complete change, and then you see it come back. You can actually track all of that.
Johnson: Fantastic. This has been very exciting for me. This is an interesting product you have here, Mike.
Frederickson: Thank you.
Johnson: I’m looking forward to visiting your booth at SMTAI myself.
Frederickson: Excellent. We welcome you.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).