Surrey Unveils Breakthrough Manufacturing Process of Ultra-Thin Sensor for Smart Contact Lenses
January 12, 2021 | University of SurreyEstimated reading time: 1 minute
In a paper published by the journal Matter, engineers from the University of Surrey together with partners from Harvard University, University of Science and Technology of China, UK National Physical Laboratory, George Washington University and Zhejiang University Ningbo Research Institute report on how they have developed a breakthrough sensor system and manufacturing process.
The global team of engineers reveal that the new contact lens sensor system contains a photodetector for receiving optical information, a temperature sensor for diagnosing potential corneal disease and a glucose sensor for directly monitoring the glucose levels in tear fluid.
Dr Shiqi Guo, the first author of this study and current postdoctoral research fellow at Harvard University, said, "Our ultra-thin sensor layer is different from the conventional smart contact lenses -- with their rigid or bulk sensors and circuit chips that are sandwiched between two contact lens layers and make contact with tear fluids via microfluidic sensing channels. This new layer could instead be mounted onto a contact lens and maintain direct contact with tears, thanks to its easy assembly, high detection sensitivity, good biocompatibility and mechanical robustness; further, it doesn’t interfere with either blinking or vision."
Professor Sheng Zhang, co-author from Zhejiang University, said, "This multifunctional contact lens with field-effect transistors can provide diversified signals from eyes, which could be combined with advanced data analysis algorithms to provide personalised and accurate medical analysis for users. This kind of research will also become one of the major research directions at the Ningbo Research Institute."
Dr Yunlong Zhao, the corresponding author of this study and Lecturer in Energy Storage and Bioelectronics at the Advanced Technology Institute(ATI), University of Surrey, said: "The COVID-19 pandemic has had an enormous impact on the entire scientific community, with many of us asking how our work could help those suffering from similar future medical emergencies. We are confident that devices that utilise our sensor layer system could be used as a non-invasive way to help monitor and diagnose people’s health. Our results provide not only a unique and simple method for manufacturing advanced smart contact lenses but also novel insight for designing other multifunctional electronics for human-machine interface."
Read the full study here.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.