DownStream Discusses Rigid-flex and DFM Trends
May 2, 2023 | Kelly Dack, CID+, EPTACEstimated reading time: 3 minutes
I recently sat down with Joe Clark, founder, and Ray Fugitt, technical marketing manager, of DownStream Technologies to discuss trends in tool design and manufacturing, including rigid-flex design and refreshed graphical user interfaces (GUI).
Kelly Dack: Gentlemen, thanks for speaking with me. Let's talk about design for manufacturability (DFM) trends and how your tools play into these.
Joe Clark: The biggest trend that we're seeing now, and the one we're highlighting in our products, is the proliferation of rigid-flex design. It presents challenges, from documentation of multiple stackups and zones to DFM analysis. Many of our customers are asking how they use these tools to solve problems that they’re dealing with now.
Dack: Ray, tell us how this plays into DFM from the standpoint of both the designer and the manufacturer.
Ray Fugitt: Thanks. My background is in rigid, so rigid-flex has been a learning process for me. Our last two releases are dedicated to flex and rigid-flex designs. We work with some large OEMs that do rigid-flex every day. We basically borrowed the rules and challenges that they’re seeing and incorporated them into our DFM tool.
Dack: When designers are setting up DFM rules and constraints in design tools or analysis software, they often ask, “What constraints do we enter? How do we find the design and manufacturing constraints for setting the tool?” So, do they come from the board supplier or are there general specifications?
Fugitt: Funny, I thought they’d ask whether the constraints come from the design rules or the fabricator. It's not an either/or situation. Basically, with our tool, you can choose to set and run it against your own internal design rules or your fabricator’s capabilities. We actually include a real-world example of design for assembly (DFA) from an American board shop, and we include that in our software. It's a starting point and then you work from there.
Dack: Very good. And let's talk about what else you are working on now.
Fugitt: Sure. BluePrint is our documentation tool. If you think about all the documentation that goes along with doing a PCB design, our existing competition for this tool is actually all the workarounds that people have devised over the years. There's no other tool out there that does what this does. We automate the creation of PCB documentation. You bring in the design, and a lot of your documentation is done right there. Then, you just work with the rest of it.
CAM350 and DFMStream are our analysis tools. As you probably know, CAM350 has a had a long history in the PCB fabrication sector. It's grown throughout the years and has transitioned to also become a very robust and powerful analysis tool, although it still does fabrication very well. But it mainly does things like DFM, design compares, netlist compares, and other things to address common problems earlier in design chain.
We recently held a user group meeting, and it was well attended. We talked about some of its newer features, such as its more modern interface. This new GUI came around a few years ago, and we continue to evolve it. We put in a new graphic engine to make it redraw quicker. We addressed some of the more aggravating things that happen when you're using a tool like this. We've done as much as we can to make this tool a lot more powerful.
Dack: Ray, you’ve been posting a lot of helpful online videos.
Fugitt: Yes. I'm a YouTube personality. I have almost 500,000 hits on YouTube.
Dack: You are indeed! You're a social media influencer. Not quite like Elon Musk, but you influenced me, and in a good way.
Fugitt: Glad I could help.
Dack: Very good. It’s been great speaking with you gentlemen.
Clark: Thanks, Kelly. It’s always a pleasure.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.