OEL Earns AS9100, Invests for Growth


Reading time ( words)

Outsource Electronics Limited, a member of the Season Group, has obtained AS9100 certification for its facility in Havant, UK. This is the culmination of a series of major investments in the site over the past two years.

Chris Coldbreath, Director of Operations - UK, said, "I am delighted that we have achieved AS9100 approval on our first attempt. It is testament to the hard work and quality-focus of the entire team in Havant. And this is the latest, although perhaps most important, of a number of developments at the site. I am certain that any customer that has not visited us since early 2013 will be hugely impressed with the changes that we have made. The shop floor has undergone a total re-fit and we have installed a new SMT line. We are also in the process of implementing a new MES system (Aegis FactoryLogix) which will enhance our QMS even further."

The investments have not only been in software and equipment. Since the upgrades began, Outsource Electronics Limited (OEL) has brought in experienced individuals to significantly strengthen its capabilities in engineering, quality and sales.

Coldbreath added, "We are already seeing significant growth as a result of these investments and we anticipate that this growth path will continue as the message gets out regarding the changes that we have made. And to ensure that our potential Aerospace and Defence customers are aware of these positive developments, we will be exhibiting at DSEI in September."

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.