SolderStar to Showcase 'Smart' Technologies at Productronica 2015


Reading time ( words)

SolderStar, a specialist manufacturer of thermal profiling equipment for the electronics industry, will preview its latest system at the upcoming Productronica 2015 event in Germany. The company's showcase will feature systems that utilize internet-based technologies to enable "big data" capture from reflow ovens for intelligent manufacturing requirements and the latest Industry 4.0 projects and trials.

SMARTLine is a state-of-the-art data capture system that builds upon Solderstar's range of real-time process monitoring instruments and sensors. The new interfaces provide the network link and software for streaming of live process data from the ovens on the production floor. The system is scalable and provides all the tools today to allow "big data" capture from single test/evaluations lines to full smart factories scenarios.

The system was developed to work with the Industry 4.0/Industrial Internet of Things (IoT) concept, a principle where machines are connected through intelligent networks that can control each other autonomously to create a SMART factory.

"The revolution of the Industry 4.0 concept will change the face of the manufacturing process and will be very prevalent in those industries using soldering processes, for example electronics manufacturing," Mark Stansfield, managing director at SolderStar, said. "An Industry 4.0 factory captures information, across the whole manufacturing process so condition monitoring and fault diagnosis can be detected easily and a longer term goal of self-predicting algorithms can be used to foresee problems before they occur. This provides a company with the ability to understand and have more of an insight into its manufacturing status. This SMART manufacturing method aims to reduce down-time and has huge monetary implications in some situations.

"Modern communication technologies and Cloud based computing is helping the Industry 4.0 revolution to become a reality. The need for increased productivity, quality and flexibility is becoming essential to stay competitive in all manufacturing sectors. The SolderStar SMARTLine system ensures that monitoring of the thermal processing equipment will not be left behind and can adapt to this new technological wave.

The company's pioneering Automatic Profiling System (APS), a full time system for profiling each and every PCB soldered in a convection reflow oven, is already monitoring process conditions in real time via an array of special sensors mounted within the oven. "So we are well placed to work with customers to produce data from the soldering ovens via standardised methods," added Stansfield.

SolderStar SMARTLine satisfied the main need today, of "Big Data" capture from the soldering processes with measurement sensors and interface modules that communicates via IP networks providing data from the SMT line. The system also provides tools for analysis of the captured data using web based methods via desktop or mobile platforms. These tools provide an immediate insight into the performance of the process, providing engineers with an invaluable insight into the manufacturing environment.

The system architecture uses a layered approach and is built upon existing and widely used protocols. As Industry 4.0 standards develop further, it will be a simple step to integrate the data feeds into customer systems with built in support for a number of exchange formats such as XML, JSON and AMQP.

Share

Print


Suggested Items

IoT: Driving Change in Manufacturing

10/15/2018 | Stephen Las Marias, I-Connect007
In the manufacturing world, the Internet of Things (IoT) can be seen as an element of Industry 4.0. The idea behind it is that factories would evolve to become smarter, to become a lot more flexible—to be able to make the products that customers want, basically at any time that they need.

How CIM and IoT Can Make Your Factory Smart

10/12/2018 | Zac Elliott, Mentor, A Siemens Business
As business needs challenge the electronics assembly industry to support increased flexibility, lower overhead, and stricter quality standards, the industry is rapidly adopting improvements in automation and analytics to meet the challenge. This article explores the changes in culture between the past, where data was simply sent point to point, and today’s multi-layered IoT technology-based solutions, as well as the effects and opportunities that are here now for the taking.

5G Requires a New Approach to Testing

06/15/2018 | Stephen Las Marias, I-Connect007
The industry will be deploying 5G at millimeter wave frequencies between 28 and 40GHz, with significantly wider bandwidths than the current instrumentation. And the rules about how you design a test fixture, or conduct testing of those products is changing. In this article, National Instrument's David Hall explains.



Copyright © 2021 I-Connect007. All rights reserved.