No GPS? Listen to VLF Radio Signals to Find Way Home
May 23, 2016 | DARPAEstimated reading time: 3 minutes
The Defense Advanced Research Projects Agency is working now to develop a backup system to be used by service members in the event that access to the Global Positioning System, or GPS, is denied to them by adversaries.
Lin Haas, with DARPA's Strategic Technology Office, discussed the effort, May 11, during "DARPA Demo Day" in the Pentagon courtyard.
"Our main goal is a backup position navigation and timing system when GPS is not available. We're focusing on naval surface and aviation ... and it's very applicable to Army helicopters," Haas said, adding that DARPA is working closely with the Army's Communications Electronics Research Development and Engineering Command in the effort.
The "Spatial, Temporal and Orientation Information in Contested Environments" project, or STOIC, is meant to provide position navigation and timing in situations where GPS is denied to U.S. forces, he said.
"Right now we don't have a backup PNT system that provides global coverage," he said. "That's what STOIC is researching -- can we provide a backup?"
The STOIC system makes use of very low frequency, or VLF signals already being generated by the Navy for use in communicating with submarines. The VLF stations are located around the globe in fixed locations. In part, STOIC uses those signals to triangulate a user's position on the globe, in much the same way a GPS receiver is used.
Haas had a video display at the Pentagon that demonstrated how some of their work might be applied. On the screen was an overview of a vehicle traveling along a route. Three lines on the screen traced the route of the vehicle's position.
A yellow line was produced by GPS, and was extremely accurate in following the vehicle along the road it traveled. A red line traced the vehicle's route using inertial navigation -- which uses things like a gyroscope and inertial sensors to measure a vehicle's movement away from a previously-known point. The inertial navigation system was accurate for a while, then sharply diverged away from the actual route, never to return. Inertial navigation systems, because they don't use any external reference, compound on their own errors.
Finally, a green line showed navigation traced by a combination of inertial navigation plus use of a VLF signal. The green line danced erratically around the actual route, but never wandered too far from the vehicle.
"We took one day to plug the VLF receiver into the navigation system, and this is the result we got when driving," Haas said. "No months of optimization."
Haas said one of the reasons the green line danced around the screen was due to magnetic interference from things in the vicinity that affect the VLF signals. There was no mitigation for that kind of interference in their initial field tests, he said. But they will work on that to correct it. Additionally, he said, such interference isn't a problem in the air or on the sea -- so that's where they are focusing their efforts now.
"Once we get that foundation for that system in place, there is a lot of work we need to do in terms of developing VLF measurement models," he said.
Haas said an important aspect of using VLF to provide PNT for use in place of GPS is to measure how various terrain affects the VLF signal, and to incorporate that information into the systems that will use VLF for navigation.
"We've got a lot of hard work to do there," he said. "After that, that is when we want to focus on ground applications, and using the signals indoors. VLF can pick up indoors."
Haas said they are shooting to demonstrate real-time positioning with their system by fiscal year 2018 or 2019. There will also be an at-sea demo this summer.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.