Purdue Lab Dissecting Lithium-ion Batteries to Improve Safety
July 22, 2016 | Purdue UniversityEstimated reading time: Less than a minute
The recent recall of hoverboards because of exploding lithium-ion batteries highlights the danger of overheating batteries. Amy Marconnet, an assistant professor of mechanical engineering, can speak about the effects of excessive heating in batteries.
Marconnet (pronounced mar-co-nay) founded the Marconnet Thermal and Energy Conversion Lab, where researchers are dissecting the batteries and testing materials making up electrodes and a critical component called a separator.
Battery failures have been reported in products ranging from commercial airliners and laptops to hoverboards and cellphones. Chemical reactions in the batteries generate heat while discharging and charging. The separator is a layer of material between the positive and negative electrodes. When it fails due to high heat, the battery short-circuits and could explode.
Marconnet and her team use thermal conductivity measurement tools to study the batteries and determine the thermal conductivity of the separator.
“This value is critical for predicting how hot the separator will get and whether it will fail,” she said. “So new data from our lab will help us predict safety and reliability of batteries used for many purposes.”
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
epoxySet Unveils UC-2210M - Urethane for Electronic Component Protection
04/29/2024 | epoxySetepoxySet introduces a new and unique, urethane potting compound. The UC-2210M was formulated to protect electronic components in high moisture and thermal environments including constant atmospheric exposure, oceanographic environments and high humidity conditions.
epoxySet Introduces EO-20E – Versatile, Electrically Conductive Epoxy
04/29/2024 | epoxySetepoxySet produces EPOXIOHM EO-20E an industry established, reliable electrically conductive epoxy designed for solder replacement, chip bonding and other intricate electronic and optoelectronic assemblies. This creamy paste has a an easy to use 1:1 mix ratio with a 48 hour work time.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.