Northrop Grumman-Built System to Destroy Multiple Targets in Air and Missile Defense Test
April 26, 2016 | Northrop GrummanEstimated reading time: 2 minutes
U.S. Army soldiers have executed a successful dual engagement flight test of the Northrop Grumman Corporation-developed Integrated Air and Missile Defense (IAMD) Battle Command System (IBCS) to identify, track, engage and defeat ballistic and cruise missile targets.
Building upon previous successful flight tests, the April 8 event validated the ability of IBCS to manage multiple threats. The test included joint sensors providing data to the IBCS engagement operations center to augment Army sensor data for a single integrated air picture, and the IBCS selecting from different missile types to defeat multiple threats arriving at the same time.
"This IBCS test demonstrated the benefit of giving warfighters expanded combinations of radars and weapon systems to achieve any-sensor, best-shooter capability," said Dan Verwiel, vice president and general manager, missile defense and protective systems division, Northrop Grumman Mission Systems. "Together with the Army, we look forward to realizing the advances offered by the IBCS open architecture, including taking advantage of sensors that look in all directions to facilitate 360-degree protection for air and missile defense missions."
The IBCS utilized sensors and interceptors from different air defense systems connected at the component level to operate on the IBCS integrated fire control network. Using tracking data from Sentinel and Patriot radars, the IBCS provided the command-and-control (C2) for a Patriot Advanced Capability Three (PAC-3) interceptor to destroy a ballistic missile target and a PAC-2 interceptor to destroy a cruise missile target.
Additionally, the IBCS flight test architecture included the Marine Corps Tactical Air Operations Module for joint C2 situational awareness. Air defenders from Fort Bliss, Texas, conducted all IBCS operations as part of the Limited User Test system evaluation ahead of a Milestone C decision later this year.
Foundational to IAMD transformation and key to the Army IAMD portfolio, the IBCS is managed by the IAMD Project Office, Program Executive Office for Missiles and Space, Redstone Arsenal, Alabama.
IBCS replaces seven legacy C2 systems to deliver a single integrated air picture and offer the flexibility to deploy smaller force packages. By networking sensors and interceptors, IBCS provides wider area surveillance and broader protection areas. With its truly open systems architecture, IBCS enables integration of current and future sensors and weapon systems and interoperability with joint C2 and the ballistic missile defense system.
About Northrop Grumman
Northrop Grumman is a leading global security company providing innovative systems, products and solutions in autonomous systems, cyber, C4ISR, strike, and logistics and modernization to government and commercial customers worldwide.
Suggested Items
TRI Opens New Manufacturing Facility
05/16/2024 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, announced that it has opened a state-of-the-art R&D and manufacturing facility.
Real Time with… IPC APEX EXPO 2024: Circuit Board Testing Strategies and the Impact of AI
05/08/2024 |Editor Marcy LaRont speaks with Bert Horner, president of The Test Connection, about the importance of strategic planning and design-for-test (DFT). Bert touches on some common mistakes that occur when DFT is not adequately considered early on. The discussion outlines an overarching industry need for a culture shift toward increasingly higher levels of integration and collaboration. Bert mentions that AI now has an influence on testing, as everywhere else, and announces his forthcoming book.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
U.S. Air Force Secretary Kendall Flies in AI-Piloted X-62A VISTA
05/06/2024 | Lockheed MartinLockheed Martin Skunk Works joined the U.S. Air Force Test Pilot School and other government and industry partners in hosting U.S. Secretary of the Air Force Frank Kendall to fly in the X-62A Variable In-flight Simulation Test Aircraft (VISTA), a one-of-a-kind aircraft modified to test artificial intelligence (AI) and autonomy capabilities.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.