ACM Research Introduces Thin Wafer Cleaning System
September 15, 2020 | Globe NewswireEstimated reading time: 3 minutes
ACM Research, Inc, a leading supplier of wafer-processing solutions for semiconductor and advanced wafer-level packaging (WLP) applications, announced the introduction of its Thin Wafer Cleaning System, a high-throughput, four-chamber system designed for single-wafer wet processes including cleaning, etching and surface finishing. The system is intended for the manufacture of both MOSFET and insulated-gate bipolar transistor (IGBT) devices for the power semiconductor market, and features complete touch-free handling and processing based on the Bernoulli effect to eliminate possible wafer damage and improve final device yield. It supports 200mm and 300mm Si wafers and is suitable for Taiko wafers down to 50-micron thickness, ultra-thin wafers of less than 200-micron thickness, high aspect ratio (>10:1) deep trench wafers as well as double-thickness bonded wafer pairs.
Modor Intelligence, a market research consulting firm, expects the IGBT market to increase from US$5.4 billion in 2019 to US$9.4 billion in 2025, based on the broad application range of IGBTs to modern appliances such as cookers, microwaves, electric cars, trains, variable-frequency drives, variable speed refrigerators, air conditioners, lamp ballasts, municipal power transmission systems and stereo systems. Modor Intelligence also reports that sales of electric cars in Europe, North America and China are creating new avenues for IGBTs to support infrastructure and for manufacturing electric vehicles.1
Furthermore, keeping up with the miniaturization trend while improving device performance has sparked demand for smaller pitch, deeper trench and thinner wafers. Yole Développement, a market research and technology analysis firm, predicted the market for thinned wafers will increase from 100 million in 2019 to 135 million in 2025, a compound annual growth rate (CAGR) of more than 5%. Yole Développement expects this market growth to be driven by memory, CMOS image sensors and power silicon carbide components as well as LED and laser diodes.2
“To compete for market share, power device manufacturers must expand their MOSFET and IGBT manufacturing lines to include wafer thinning equipment, without significantly increasing the overall fab footprint,” said David Wang, ACM’s Chief Executive Officer and President. “We have responded by developing a four-chamber tool that offers much higher throughput than the currently-available two-chamber systems. Additionally, we outfitted the tool with a proprietary contactless handling and processing system to prevent these fragile wafers -- which can be as thin as 50-microns -- from being damaged during the backside thinning and cleaning processes, thereby increasing overall device yield.”
ACM’s Thin Wafer Cleaning System has been designed to meet manufacturers’ needs. After mechanical grinding/polishing is performed to achieve desired thickness, the handling system supports these ultra-thin, high-warpage wafers throughout subsequent critical processes, including silicon thinning using a wet-etch step to eliminate microcracks. Additionally, by implementing a different combination of chemistries, the tool can be used for cleaning, photoresist removal, thin film removal and metal etching.
The tool’s handling system is programmable to accommodate deep trench, Taiko, ultra-thin wafers or bonded wafers. The robot arms for loading and unloading, as well as the chuck, have been designed for non-contact wafer handling using a proprietary method based on the Bernoulli effect. Nitrogen gas (N2) provides constant pressure to keep the wafer floating in place on the arm, which can be flipped for processing on either side while still holding the wafer in place. This allows for handling high-warpage wafers without contact.
During the wet process, the wafer sits front-side down on a Bernoulli chuck, where an N2 flow cushions the wafer, protecting it and keeping it dry. This proprietary design, using ACM’s patented technology on a Bernoulli chuck, features a recipe-controlled gap between the wafer and chuck to meet requirements for undercut width control on the wafer device side edge and pin mark-free control. Additionally, the system can be configured to include an optional thickness measurement function.
Each chamber can be configured with up to four swing arms for delivering process chemistries such as wet etchants, solvents, RCA cleaning chemicals, deionized water and nitrogen. Additionally, the chambers are designed to allow reclaiming of two types of chemicals.
ACM delivered its first Thin Wafer Cleaning System to a China-based analog/power semiconductor manufacturer in the second quarter of 2020, with revenue recognition subject to qualification and acceptance.
Suggested Items
IDC Forecasts Slower Growth for Global Telecommunications Services Market: Could AI Help Telcos to Maintain Healthy Margins?
05/08/2024 | IDCWorldwide spending on Telecom Services and Pay TV Services reached $1,509 billion in 2023, an increase of 2.1% over 2022, according to the International Data Corporation (IDC) Worldwide Semiannual Telecom Services Tracker.
Simbe Partners with Plexus to Scale Manufacturing and Meet Global Retail Demand
05/08/2024 | Globe NewswireSimbe, the leading provider of Store Intelligence™ solutions that increase retailer performance through unprecedented visibility and insights, today announced a partnership with Plexus Corp. to bring its best-in-class retail robotics-as-a-service to market quickly and at global scale.
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.
HBM Prices to Increase by 5–10% in 2025, Accounting for Over 30% of Total DRAM Value
05/06/2024 | TrendForceAvril Wu, TrendForce Senior Research Vice President, reports that the HBM market is poised for robust growth, driven by significant pricing premiums and increased capacity needs for AI chips.
Tablet Shipments Show Signs of Recovery in Q1 2024
05/06/2024 | IDCAfter more than two years of decline, worldwide tablet shipments posted modest year-over-year growth of 0.5% in the first quarter of 2024 (1Q24), totaling 30.8 million units, according to preliminary data from the International Data Corporation (IDC) Worldwide Quarterly Personal Computing Device Tracker.