All Flex Flexible Circuits & Heaters Achieves AS/ISO Re-certification


Reading time ( words)

All Flex, manufacturer of flexible printed circuits and heaters announces re-certification to AS9100C and ISO 9001:2008. AS9100 is an international aerospace standard for quality assurance requirements of aerospace companies.

ISO 9001:2008 is a quality management system required for the military, defense, and aerospace markets where flexible circuitry is heavily used. These standards are important in these industries where high reliability is imperative. This re-certification marks the 14 year anniversary that All Flex has maintained the critical certification.

Operations V.P. Gary Ryan says, “The audit process is successful for us year after year because of our team’s commitment to meeting the intent of the standard, it’s how we operate every day working to deliver high quality parts on time.”

Upon successful completion of the comprehensive audit in the areas of sales planning, manufacturing, and purchasing, Registrar TÜV Rheinland of North America, Inc. granted the re-certification.

Quality Manager Rebecca Steinbauer says it’s truly a team effort, “The entire All Flex team demonstrates a commitment to controlled, consistent processes while finding new and creative ways to continually improve what we do. This makes compliance to requirements, as industry standards and our capabilities continue to grow, much easier.”

All Flex has been manufacturing flexible circuits for nearly a quarter of a century producing prototype and now high volume production. All Flex also provides comprehensive surface mount and thru hole component assembly services. Seven years ago the company added polyimide and silicone rubber heater circuits to their product line and offers custom, as well as stock, heater designs.

About All Flex Flexible Circuits & Heaters

All Flex is a privately held company that manufactures quick-turn to high volume flexible circuits and custom and stock heaters.  All Flex employs about 150 people and is headquartered in Northfield, MN with a second manufacturing facility in Bloomington, MN. The company is also UL Recognized and ITAR/JCP Registered.

To learn more about All Flex Flexible Circuits & Heaters visit: WWW.ALLFLEXINC.COM

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/05/2022 | Nolan Johnson, I-Connect007
The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.



Copyright © 2022 I-Connect007. All rights reserved.